Overview
The G2 Axle and Gear 85-2013M-28 is a mini spool for Ford 8.8 inch and Mazda 8.8 inch rear axles, with 28 splines. A spool locks the two axle shafts together so both wheels turn at the same speed, which the brand presents as an economical traction option.
Machining from 4130 billet steel gives the spool its strength, and CNC work keeps the dimensions consistent. Check the axle shaft spline count before assembly, because a 28 spline spool will not mate with shafts of a different count.
Key features
- CNC machined from 4130 billet steel
- 28 spline axle fitment
- Lower-cost traction option for the rear housing.
- Mini spool format for the rear Ford 8.8 inch and Mazda 8.8 inch housings
Choosing and fitting a spool
A mini spool locks the two axle shafts together so both wheels turn at the same speed. That helps when one wheel loses grip, but it also means the wheels cannot run at different speeds in tight turns. On pavement, many owners keep a spool in mind as a traction upgrade for trail use rather than daily driving, and they plan around that tradeoff.
Before buying, count the splines on both shafts and confirm the housing type. Pinion and ring gear work is a separate job, so budget for those parts and for a shop that can set backlash and bearing preload. Once fitted, check for leaks at the carrier and listen for chatter during slow turns, since those signs point to a setup that needs attention.
- Axle shaft spline count
- Housing size and axle type
- Ring gear, pinion and bearing set
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 85-2013M-28 |
| UPC | 631410103588 |
| Axle type | Ford 8.8 inch; Mazda 8.8 inch |
| Popular axle manufacturer | Ford |
| Axle location | Rear |
| Axle spline | 28 splines |
| Differential type | Spool |
| Material | 4130 billet steel |
Vehicle fitment
This spool covers Ford 8.8 inch and Mazda 8.8 inch axle types and is universal fit. No vehicle years or chassis codes come with it, so match the housing and spline count to your axle instead of relying on a model name.
A 28 spline mini spool is not the same part as a 31 spline one, so check the count on your shafts. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fitting a spool requires opening the axle housing, removing the carrier, and setting ring gear backlash and bearing preload to the specified values. Plan on a shop experienced with gear setup for that work.
What’s included
The mini spool unit only.
Not included: ring gear, pinion and bearings are needed from another source.






