Overview
The G2 Axle and Gear open differential carrier, part number 65-2025, is a replacement case for AMC 20 front and rear axles. G2 Axle and Gear describes its open differentials as a direct replacement for the factory differential, suited to repairs and to getting the correct case break for your gear ratio.
It is supplied as an open differential case only with an empty case spline, so it is a carrier body rather than a complete gear assembly. Because no vehicle years or models are stated, match the AMC 20 axle type on your vehicle before buying.
Key features
- Direct replacement for the factory AMC 20 open differential
- Open differential design for repairs
- Case-only configuration with an empty case spline
- Helps set the correct case break for a chosen gear ratio
- Used in front or rear AMC 20 axle locations.
Gear ratio and case setup
A carrier body sets the position of the ring gear and differential gears inside the axle, so the case break and mounting faces need to match the gear set you install. When choosing a ratio, pick the ring and pinion first and then confirm the carrier fits that combination. Mixing components that were not designed together often leads to poor tooth contact.
Most carrier replacements also involve new bearings, a pinion seal and axle seals, since the housing is opened during the job. Clean the housing and carrier mating surfaces before assembly. A qualified technician should set gear mesh and bearing preload, since those settings control wear and noise on the road.
- Check ring gear runout before assembly
- Replace carrier bearings in pairs
- Inspect housing bearing bores for wear
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 65-2025 |
| UPC | 631410096439 |
| Axle manufacturer | AMC |
| Axle type | AMC 20 |
| Axle location | Front or rear |
| Differential type | Open differential, case only |
| Axle spline | Empty case |
Vehicle fitment
Vehicle years, makes and models are not confirmed for this carrier. The AMC 20 axle type in front or rear locations is the match point, so check axle compatibility before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the carrier is supplied empty, the ring gear, pinion, side and spider gears, and bearings are not part of the item and must be sourced separately if needed. Gear mesh and bearing preload are set during assembly, so a qualified axle technician should handle installation.
What’s included
The open differential case only, with an empty case spline.
Not included: Ring gears, pinions, side and spider gears, bearings and axle shafts must be sourced separately.








