Overview
The G2 Axle and Gear 65-2015L is an open differential carrier case for GM 10 bolt rear axles at 7.625 inches. It is a direct replacement for the factory differential and comes as an open differential case only.
G2 presents these open differentials as an economical repair option for getting the proper case break for your gear ratio. The carrier is a rear axle part, so it suits shops and owners rebuilding a GM 10 bolt rear end.
Key features
- Direct replacement for the factory differential case
- Open differential case only, with an empty case and no axle spline listed
- Rear axle location
- GM 10 bolt axle type, 7.625 inches
- Economical option for repairs and for the proper case break for your gear ratio
Rear end rebuild planning
A rear differential case controls how the ring gear and pinion sit inside the axle housing. When the case is swapped, the gear mesh and bearing preload must be set again, so the rebuild is more than a bolt-in job. Ring gear backlash and pinion depth should be checked with the new case before the axle is closed.
Plan the rebuild around the complete gear set. Ring and pinion sets are typically matched, and bearings should be replaced when the case is opened. Support the vehicle on stands before working on the rear axle, and keep track of shims and bearing caps during disassembly so the setup can be restored correctly.
- Check backlash and pinion depth together
- Replace bearings when the case is opened
- Support the vehicle securely on stands
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 65-2015L |
| Listed part number | G/265-2015L |
| UPC | 631410096361 |
| Popular axle manufacturer | GM |
| Axle location | Rear |
| Axle type | GM 10 Bolt 7.625 Inches |
| Differential type | Open differential case only |
| Axle spline | Empty case |
| Fitment field | Universal Fit |
Vehicle fitment
No specific vehicle year, model or trim is given for this carrier. It is for a GM 10 bolt, 7.625 inch rear axle, so confirm your axle type and housing size before ordering.
Confirm your axle type and housing size before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A differential case swap changes the gear mesh, so the ring gear, pinion and bearings must be set up together. Have a professional check gear mesh, bearing preload and backlash. Support the vehicle securely on stands before working on the rear axle.
What’s included
An open differential case only.
Not included: ring and pinion gear set, bearings and other gears, which must be sourced separately.









