Overview
The G2 Axle and Gear 85-2011C is a Ford 9 inch full spool for aftermarket 35 spline axles. It is CNC machined from billet 4130 steel and heat treated, and it is designed for use with all gears in an aftermarket case with a 3.250in. bore.
A full spool locks both axle shafts together, so both wheels turn at the same speed and both receive power even when one tire is in the air. It is built to be light for its strength.
Key features
- CNC machined from billet 4130 steel
- Heat treated for durability
- Full spool design for 35 spline axles
- For use with all gears
- Requires an aftermarket 3.250in. bore case
Full spool driving
A full spool changes how the vehicle behaves because both wheels are forced to turn together. On pavement, the outside wheel cannot run faster in a turn, so the drivetrain binds and tires scrub. This is why a full spool is usually reserved for trail use, where wheel speed differences are less of a concern.
Gear setup and lubricant matter more with a full spool, because the parts take the loads of both wheels at once. Check the pinion depth and backlash after installation, and inspect the gears and bearings often during the first trail outings. Keep the axle filled with the gear oil your setup calls for.
- Plan to use a full spool mainly for trail driving
- Check gear setup after the first outings
- Inspect bearings and gear teeth regularly
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 85-2011C |
| UPC | 631410103649 |
| Axle application | Ford 9 inch |
| Spline count | 35 splines |
| Spool type | Full spool |
| Material | 4130 billet steel |
| Heat treatment | Heat treated |
| Case requirement | Aftermarket 3.250in. bore case |
| Gear compatibility | All gears |
Vehicle fitment
It is a Ford 9 inch full spool for aftermarket 35 spline axles. Match the 35 spline count and 3.250in. case bore to your housing before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A full spool makes both wheels turn together, which changes how the vehicle steers on pavement. Fitting it into the 3.250in. bore case and setting up the gears should be handled by a professional.
What’s included
One G2 Axle and Gear Ford 9 inch full spool. Not included: the aftermarket 3.250in. bore case the spool requires, and the gears.







