Overview
The Crown Automotive 68035575AA is a standard differential gear set for the Dana 44 rear axle, for two-door and four-door models. It uses 1/2-inch ring gear bolts.
It fits the 2007–2018 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited versions of those trims.
Key features
- Standard differential design
- 1/2-inch ring gear bolts
- Dana 44 rear axle
- Fits 2007–2018 Wrangler (JK) trims
Gear set setup and wear
A gear set only works well when the ring and pinion mesh, pinion depth and bearing preload are set together. Small errors show up as whine under load, a hum on the highway, or a clunk when the throttle changes, and they usually get worse rather than better. Correct setup is the reason professional installation matters for this part.
Before choosing a gear set, confirm the axle type, the ring gear bolt size and the carrier condition on the vehicle. Worn pinion bearings, a damaged crush sleeve or a bent carrier can undo a new set quickly, so inspect those parts during the job. Many installers replace the bearings and seals at the same time to keep the setup stable.
- Note any metal in the gear oil at drain
- Check the carrier bearings for play
- Replace the crush sleeve when the pinion nut is reset
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 68035575AA |
| UPC | 70000689860 |
| Axle type | Dana 44 |
| Position | Rear |
| Axle location | Rear axle location |
| Differential type | Standard |
| Ring gear bolts | 1/2 inch |
| Body styles | Two-door and four-door models |
Vehicle fitment
Trims covered: 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X, including Unlimited versions of those trims.
The list does not include the 1997–2006 Wrangler (TJ) or the Wrangler (JL).
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A Dana 44 gear set is normally set up by a professional, covering gear mesh, pinion depth and bearing preload, followed by a break-in period. Check the break-in steps with a qualified installer before driving the vehicle hard.
What’s included
One standard gear set, Crown Automotive part number 68035575AA.





