Overview
The FUEL Off-Road Triton D715 20×10 is an aluminum directional wheel in a platinum finish. It is listed with two bolt pattern entries, 5 on 5.5/5 on 150 and a second 5 on 150, and carries part number MHTD71520007047.
The 20 Inch diameter and 10 Inch width pair with an offset of -18, a center bore of 110 and a backspacing of 4.8. Because two patterns are given, confirm which one your hub uses before comparing anything else.
Key features
- Directional style in a platinum finish
- Aluminum construction
- 20 Inch diameter and 10 Inch width
- Bolt patterns 5 on 5.5/5 on 150 and a second 5 on 150 entry
- Offset of -18 and backspacing of 4.8
- Center bore of 110
Seat style and hub-centric fit
Lug nut seat type decides how the nut grips the wheel. Conical seats, ball seats and flat seats each need a matching nut, and using the wrong one can leave the wheel loose even when the nut looks tight. Check the seat type on the nuts you plan to use before mounting, and never mix seat types on the same wheel.
A center bore that is larger than the hub needs a hub-centric ring so the weight rests on the hub instead of the lug nuts. Confirm the ring size against the hub’s centering diameter, and clean the hub face and wheel bore so the ring sits flat. Retorque the nuts after the first short drive and again after the first few trail runs.
- Match the nut seat to the wheel
- Use hub-centric rings when the bore is larger than the hub
- Clean the hub face before mounting
- Recheck torque after initial drives
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Model | Triton D715 |
| Part number | MHTD71520007047 |
| Wheel diameter | 20 Inches |
| Wheel width | 10 Inches |
| Bolt pattern | 5 on 5.5/5 on 150 |
| Bolt pattern #2 | 5 on 150 |
| Center bore | 110 |
| Offset | -18 |
| Backspacing | 4.8 |
| Style | Directional |
| Finish | Platinum |
| Construction | Aluminum |
Vehicle fitment
It is a Universal Fit wheel, so confirm the bolt pattern, 110 center bore and -18 offset against your vehicle. Confirm fit for its year, model and trim before ordering.
The 5 on 5.5 and 5 on 150 patterns are different, and a hub takes only one of them. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the hub before mounting so that only the matching pattern is used. The 110 bore must match the hub’s centering diameter, so confirm that first. Confirm the lug nut seat type before installation.
What’s included
This is a single wheel only. Lug nuts, center caps and tires are not part of the order.
Not included: Tires and wheel hardware are not part of this wheel.











