Overview
The FUEL Off-Road Ammo D701 17×9 wheel, part MHTD70117908950, has an anthracite and black finish, a 6 on 135 bolt pattern and an offset of 1. It is a split spoke aluminum wheel for trucks and SUVs that run a six-lug hub with 135 spacing. Fitment is universal, with no vehicle named.
The center bore is 87 and the backspacing is 5. The wheel measures 17 inches across and 9 inches wide. The anthracite and black two-tone finish gives contrast between the face and barrel.
Key features
- Anthracite/Black finish
- Split spoke design
- Aluminum construction
- 6 on 135 bolt pattern
- Offset of 1 with 5 backspacing
- 87 center bore and 17×9 size
Two-tone finishes
Anthracite and black two-tone finishes hide light road dust well but show brake dust on the face more readily. Clean with a mild soap and a soft brush, and rinse thoroughly to remove grit. Avoid abrasive pads, which can wear through the darker top coat and reveal lighter material underneath.
A 6 on 135 pattern is not interchangeable with the common six-lug spacing, so the hub must match this exact layout. Check the hub spacing with a caliper or a template before ordering, and confirm that the center bore fits the hub. A hub smaller than the wheel bore needs centering rings so the wheel seats true.
Split spoke designs have more gaps for mud and grit to collect in. After off-road use, clean the spoke roots and check the lip for dents or cracks. Lug torque should be checked after the first drives and again after any tire change, since new wheels can settle against the hub face.
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Model | Ammo D701 |
| Part number | MHTD70117908950 |
| Wheel diameter | 17 Inches |
| Wheel width | 9 Inches |
| Bolt pattern | 6 on 135 |
| Offset | 1 |
| Center bore | 87 |
| Backspacing | 5 |
| Style | Split Spoke |
| Finish | Anthracite/Black |
| Construction | Aluminum |
Vehicle fitment
No year, make, model or trim is attached to this wheel, so confirm the 6 on 135 pattern against your hub. This pattern is less common than the usual six-lug spacings, so measure it rather than assume a match.
Confirm your vehicle’s year, model and trim before ordering. An 87 center bore that does not match the hub leaves the wheel off-center.
Installation notes
Measure the hub bore against the 87 center bore before fitting. Hub-centric rings are needed when the hub is smaller than the wheel bore. Check clearance at the offset of 1 and recheck lug torque after the first drive.
What’s included
The wheel is the item described here, with its anthracite and black finish and part number MHTD70117908950.
Not included: Plan on buying tires, hardware and valve stems separately before installing this wheel.











