Overview
The Fox Racing Shox 2.0 Bump Stop, part 980-02-311, is an air bump stop with a universal fit design. It offers 2.5 inches of travel and uses a 1-1/4 in shaft. The aluminum body is zinc plated and clear coated, with an extended length of 11.36 inch and a collapsed length of 8.85 inch. It is branded as a Fox 2.0 bump stop.
Fox has made shocks for 30 years and designs its products around performance on trails and tracks. For fitting, the travel, shaft size and open and closed lengths matter most, so measure your shock before choosing this stop.
Key features
- 2.5 inches of travel
- 1-1/4 in shaft
- Aluminum body, zinc plated and clear coated
- Extended length 11.36 inch, collapsed length 8.85 inch
- Air bump type
Air bump basics
An air bump stop works as a progressive cushion, giving more resistance as the suspension nears full compression. That behavior can soften the final contact compared with a solid rubber stop, but it also means the stop’s internal feel changes with the shock setup. Check the travel and the open and closed lengths against your shock’s stroke before assuming the stop will match.
Air bump stops are usually reviewed when the shock is rebuilt or the suspension height changes. Inspect the body for corrosion, leaks or damage to the seal at the shaft, and make sure the mount still holds the stop square as the suspension cycles.
- Compare lengths with shock stroke
- Inspect the body for corrosion or leaks
- Check the mount after height changes
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-02-311 |
| UPC | 70000462492 |
| Model | Fox 2.0 Bump Stop |
| Travel | 2.5 inches |
| Shaft | 1-1/4 in |
| Body | Aluminum, zinc plated, clear coated |
| Extended length | 11.36 inch |
| Collapsed length | 8.85 inch |
| Type | Air bump |
Vehicle fitment
It is a universal fit design, so fitment is not confirmed for any specific vehicle. Check the shaft size and travel against your shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the extended and collapsed lengths with your shock’s stroke and the free space at the mount before installing. Confirm that the 1-1/4 in shaft matches the shock it will be used with.
What’s included
Confirm the contents of the box before ordering, including whether hardware or a mounting kit is included.







