Overview
The Fox Racing Shox 2.0 Performance Series Smooth Body IFP Shock, part number 985-24-007, is a hydraulic, gas-charged shock with a bushing mount. Its listed extended length is 35.95 inch and collapsed length is 21.85 inch.
The smooth body line comes in several sizes and can be valved to suit different driving needs. The mount measures 2.0 X 14.0 inch. It carries a Universal Fit label, so compare these figures with your current shock before installing.
Key features
- Smooth body IFP design in the 2.0 Performance Series
- Bushing mount measuring 2.0 X 14.0 inch
- Hydraulic, gas-charged shock design
- Extended 35.95 inch and collapsed 21.85 inch lengths
- Universal Fit label
Measuring before you swap
A bushing mount shock relies on the bushings to isolate the body from the bracket, so worn or split bushings can make a shock feel loose or noisy. Before removing the old unit, measure the mount-to-mount distance and compare it with the new shock’s extended and collapsed figures. Taking those readings first makes it easier to spot a mismatch before the vehicle is raised.
Smooth body shocks are often chosen where a simple, rugged damper is preferred over an external reservoir. The bushing ends need to stay clean, lubricated where the maker allows and free of grit. Replacing bushings at the same time as the shock is common, and the job goes faster when the old bushings are on hand for comparison.
- Measure mount centers before disassembly
- Check bushings for splits and play
- Keep the vehicle supported while the old shock is removed
- Replace worn bracket hardware at the same time
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-007 |
| UPC | 70000617857 |
| Series | 2.0 Performance Series Smooth Body IFP |
| Mount | Bushing mount, 2.0 X 14.0 inch |
| Extended length | 35.95 inch |
| Collapsed length | 21.85 inch |
| Design | Hydraulic, gas charged |
Vehicle fitment
The 985-24-007 is a universal fit shock, so it suits no single vehicle by name. Confirm fit using its mount and lengths against your current shock.
Check the 35.95 inch extended and 21.85 inch collapsed figures against your existing mounting points. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushing mounts must line up with the bracket on each end, so measure the existing attachment points before removing the old shock. Keep the suspension supported while you work, since a shock carries part of the vehicle’s load.
What’s included
Check the package for bushings and hardware before starting the install, and match them to your bracket.
Not included: Compare the bracket and fasteners with the package contents before removing the old shock.








