Overview
The Fox Racing Shox 2.0 Performance Series IFP shock, part number 985-24-024, is a direct replacement shock with a 2.0 inch body, a 5/8 inch shaft and an internal reservoir, finished in black and aluminum.
Fox says its direct replacement shocks are bolt-on units that use OEM direct replacement mounting, and that each application is tested by Fox engineers to maximize suspension travel and performance on and off the road. Direct replacement shocks are available in hundreds of applications, from stock to lifted, as well as aftermarket kit replacements. The shock is a gas charged unit in the 2.0 Shock Series. Travel and the extended and collapsed lengths are application specific.
Key features
- 2.0 inch diameter shock body
- 5/8 inch diameter shaft
- Internal reservoir (IFP) design
- OEM direct replacement mounting
- Black and aluminum finish
- Gas charged, 2.0 Shock Series
- Travel, extended length and collapsed length are application specific
Shock replacement and wear
Shocks control how quickly the springs and tires move, which affects comfort, tire contact and braking stability. Worn shocks let the body bounce after bumps and can cause the nose to dip hard under braking, so they often need replacing before other parts when a vehicle begins to feel loose.
Shocks are usually replaced in axle pairs so left and right damping stays balanced. Check the shock body and shaft for oil streaks, dents and bushing wear, and test the damping by pushing down on each corner. Replacing one shock on its own can leave the vehicle pulling or feeling unevenly controlled.
Lift height and tire size matter when choosing a replacement. A taller ride needs shocks with enough travel for the new suspension geometry, so match the shock to the lift and the wheel and tire you run.
- Look for oil on the shock body or shaft
- Replace shocks in axle pairs
- Check bushings and mounting hardware during installation
- Re-check fasteners after the first drives
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-024 |
| UPC | 70000617872 |
| Product type | Direct replacement shock absorber |
| Series | 2.0 Performance Series, 2.0 Shock Series |
| Body diameter | 2.0 inches |
| Shaft size | 5/8 inch diameter |
| Reservoir | Internal |
| Mounting | OEM direct replacement mounting |
| Finish | Black and aluminum |
| Type | Gas charged |
| Travel | Application specific |
| Extended and collapsed length | Application specific |
| Fitment type | Direct fit |
Vehicle fitment
Fit depends on the application, so confirm the vehicle, model year and lift height before ordering. Travel, extended length and collapsed length are application specific.
Because the lengths and travel are application specific, do not assume this shock suits any vehicle that is not confirmed by the manufacturer. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension components affect handling and braking, so professional installation is recommended. Torque all fasteners to the values for your vehicle.
- Have the alignment checked after any suspension work.
- Check tire clearance and brake hose and wiring length through the full range of travel.
- Re-check fasteners after the first miles of driving.
- Check your local regulations on suspension height changes.
- Replace shocks in axle sets so left and right sides match.
What’s included
One shock, sold separately.
Not included: Confirm the mounting hardware and shock boots you need before installing.








