Overview
The Fox Racing Shox 985-24-109 is a 2.0 Performance Series smooth body reservoir shock, a bolt-on direct-fit replacement damper with an extended length of 26.80 in and a stroke of 10.60 in. No vehicle applications are named for this part number, so match it to your current shock before ordering.
The shock body is metal-impacted aluminum, which Fox says dissipates heat faster than conventional steel. An Internal Floating Piston (IFP) separates the shock oil from a high-pressure nitrogen gas chamber, which Fox says supports a predictable ride on very rough roads.
Key features
- Metal-impacted aluminum shock body that dissipates heat faster than steel
- Internal Floating Piston (IFP) keeps shock oil apart from the nitrogen gas chamber
- High-pressure nitrogen gas charge for predictable ride quality
- Smooth body reservoir design
- Bolt-on, direct-fit replacement format
Care for reservoir shocks
Reservoir shocks separate the damper body from the gas chamber, which makes them easier to tune for consistent response over long travel. Cleaning dirt off the body after off-road trips helps the seals run cleaner and makes leaks easier to spot during inspection.
Because the shock is a bolt-on replacement, the mounting hardware and bushings do most of the work in holding it steady. Check the fasteners after the first few drives, and look for cracked rubber around the eyes. A shock that clunks at the mounts often needs new bushings more than a new damper.
- Wash mud from the body after trail use
- Check mounting bolts after first drives
- Inspect bushings for splits and wear
- Watch for oil streaks on the body
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-109 |
| UPC | 700007190355 |
| Series | 2.0 Performance Series |
| Body | Smooth body reservoir, metal-impacted aluminum |
| Extended length | 26.80 in |
| Collapsed length | 16.20 in |
| Stroke | 10.60 in |
| Piston design | Internal Floating Piston (IFP) |
| Gas charge | High-pressure nitrogen |
Vehicle fitment
No year, make, model or trim is identified for this shock. It is a Direct Fit design meant to replace an original shock, so compare its mounting points and lengths with your current unit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a bolt-on replacement, the new shock’s mounting points should line up with the original shock. Compare collapsed and extended lengths before you start, and road-test the vehicle slowly afterward, since shocks affect handling and braking.
What’s included
The package is one Fox 2.0 Performance Series shock. Mounting hardware and bushings are not part of it, so check your installation needs before starting.








