Overview
The Fox Racing Shox 980-24-635 is a 2.0 Series emulsion shock with a remote reservoir and 8 inches of travel. Its 2.0-inch body runs on a 5/8-inch shaft, and the reservoir is 2.0 inches in diameter by 8 inches long.
The mount is stem top / bushing and the finish is black and zinc. Shocks in this line can be valved for different driving needs, so compare the lengths below with the shock you plan to replace.
Key features
- 8 inches of travel between 13.19-inch collapsed and 21.19-inch extended lengths
- Remote reservoir, 2.0 in diameter by 8 in long
- 2.0-inch body with a 5/8-inch shaft
- Stem top / bushing mount listed
- Black and zinc finish
Stem top and bushing mounts
The mount style controls how the shock attaches at one end. A stem top mount uses a threaded stud that passes through a mounting bracket, while a bushing mount uses a rubber or polymer bushing that sits inside an eye. Matching the mount to existing hardware prevents forcing the shock into a bracket it was never designed for.
Bushings wear over time, and worn ones let the shock move side to side, which causes clunks and uneven damping. When replacing, inspect the bracket for cracks and check the stud threads for damage. Use the correct nuts and washers so the joint keeps its clamp force on rough trails.
- Confirm stem top or bushing style
- Inspect bushings for splits
- Check stud threads for damage
- Use the correct washers and nuts
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-635 |
| UPC | 70000515111 |
| Series | 2.0 Series |
| Shock type | Emulsion with remote reservoir |
| Body diameter | 2.0 in |
| Remote reservoir | 2.0 in diameter x 8 in length |
| Travel | 8 in |
| Shaft diameter | 5/8 in |
| Extended length | 21.19 in |
| Collapsed length | 13.19 in |
| Finish | Black and zinc |
| Mount | Stem top / bushing |
Vehicle fitment
Fitment is not confirmed for this shock. Use the collapsed and extended lengths above to check it against your current shock.
Mount type matters as much as length: confirm whether your vehicle uses a stem top or a bushing mount. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the stem top or bushing mount to your existing hardware before installing. Plan the remote reservoir position and hose route so the hose stays clear of moving parts.
What’s included
Compare the included hardware and quantity with your installation plan before starting.








