Overview
The Fox Racing Shox 2.0 Performance Series IFP shock, part number 985-24-066, is a front shock for the 1998–2007 Toyota Land Cruiser Base, with OEM direct replacement mounting.
The shock has a black and aluminum finish, a 2.0 inch body diameter and a 5/8 inch shaft. Its reservoir is internal. Travel, extended length and collapsed length vary by application, so measure your current shock and compare before installing.
Key features
- Internal floating piston design with an internal reservoir
- OEM direct replacement mounting
- Black and aluminum finish
- 2.0 inch body diameter
- 5/8 inch shaft diameter
- Front mounting position
- Lift height rating of 0 to 1.5 in.
Choosing a replacement front shock
A front shock works with the steering, the springs and the tires to control body motion over bumps and during braking. When the old unit is worn, the vehicle may bounce after dips, drift during turns or wear the front tires unevenly. Replacing the shock restores that control, but the new unit should match the original’s mounting points and stroke so the suspension geometry stays correct.
Before buying, compare the old shock’s length and body diameter with the new one, and look at the mounting ends. Front shocks often work alongside upgraded springs or bump stops, so check whether those parts need attention at the same time. Inspect the upper and lower bushings for cracking, since a worn bushing can make a new shock feel loose.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-066 |
| UPC | 70000669762 |
| Series | Fox 2.0 Performance Series |
| Mounting position | Front |
| Reservoir | Internal |
| Body diameter | 2.0 inch |
| Shaft diameter | 5/8 inch |
| Finish | Black and aluminum |
| Mounting | OEM direct replacement |
| Travel | Application specific |
| Extended and collapsed length | Application specific |
| Lift height rating | 0 to 1.5 in. lift |
| Sold as | Sold separately |
Vehicle fitment
It fits 1998–2007 Toyota Land Cruiser Base models only.
Land Cruiser years outside 1998–2007 and trims beyond Base are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the 5/8 inch shaft and the 2.0 inch body to your existing shock’s dimensions where possible, and check the travel and extended length before installing.
What’s included
One shock is described under part number 985-24-066.
Not included: The shock is sold separately. Check the package contents against your installation before starting.








