Overview
The Fox Racing Shox 2.0 Performance Series ATS stabilizer, part number 983-02-119, is an adjustable through shaft steering stabilizer for Dodge and Ram 2500 and 3500 trucks. Fox lists fitment for 2008–2010 Dodge Ram 2500 and 3500 models and for 2011–2013 Ram 2500 and 2011–2012 Ram 3500 models.
The ATS design cancels unwanted steering forces in both directions, taking the place of two conventional opposing stabilizers. It has an integrated reservoir for added fluid capacity and cooling during hard use, and 24 clicks of external adjustment to fine tune the feel.
The ATS also uses relocating hardware that moves the stabilizer up and out of the way, including a track bar relocation bolt and a tie-rod mounting clamp.
Key features
- Adjustable through shaft design that cancels steering forces in both directions
- 24 clicks of external adjustment
- Integrated reservoir for added fluid capacity and cooling
- 8.1 inch stroke
- 1-5/8 tie rod connection
- Aluminum construction
Living with an ATS design
A through-shaft stabilizer works as one unit across the axle, so changes in tire size or ride height can shift how it loads the track bar and tie rod. Relocating hardware moves the mounting point, which means clearances need to be checked again after any suspension or steering change.
Because the reservoir holds extra fluid, inspect its fittings and hoses for seepage after rough use. Record the adjustment setting you choose so you can return to it after service. Worn bushings elsewhere in the steering system can change the feel just as much as the stabilizer setting, so inspect them at the same time.
- Recheck clearance after any suspension change
- Inspect reservoir fittings and hoses for seepage
- Note your adjustment setting before servicing
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 983-02-119 |
| UPC | 700007031361 |
| Series | 2.0 Performance Series |
| Type | ATS stabilizer, stabilizer only |
| Single / dual | Single |
| Stroke | 8.1 in |
| Tie rod | 1-5/8 in |
| Adjustment | 24 clicks, external |
| Reservoir | Integrated |
| Material | Aluminum |
| Fitment | Direct Fit |
| Brackets included | Not included |
Vehicle fitment
Fits 2008–2010 Dodge Ram 2500 and 3500 models, and 2011–2013 Ram 2500 and 2011–2012 Ram 3500 models, in several trims including Laramie, SLT, ST and SXT. Other years and models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
The list does not include 2014 and later Ram 2500 or 3500 models, or other Dodge trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The relocating hardware changes where the stabilizer mounts, so check track bar and tie-rod clearance before installing. Support the truck securely before working near the steering linkage.
What’s included
Check the package contents for the track bar relocation bolt and tie-rod mounting clamp before installing.
Not included: Brackets are not included, so check the package contents against your installation before installing.















