Overview
The Fox Racing Shox 980-02-106 is a 2.5 coilover with remote reservoir, a gas-charged damper designed to be paired with a separate coil spring. It has a 2.5-inch body, 10-inch travel and a 7/8-inch shaft, and the remote reservoir is a separate component that adds oil volume beside the body.
Fox’s coilover line has a long race history and a wide range of tuning options. The 980-02-106 is universal fit, so it is not built for one vehicle. Its extended length is 29.43 inch and collapsed length is 19.50 inch, so check the mounting points on your vehicle against those figures.
The shorter 10-inch travel of this version, compared with longer-travel coilovers in the same family, makes the length numbers especially important when you plan a fit.
Key features
- 2.5-inch body diameter
- 10-inch travel
- 7/8-inch shaft diameter
- Remote reservoir measuring 2.50 x 14.00 inch
- 1/2-inch bolt or heim mounting
- Black and zinc finish
Travel and length matter
Shorter travel changes how much the coilover can move before the spring and body reach their limits, so the length numbers matter when checking a fit. A coilover with less travel can bottom out sooner on rough ground, which puts more load on the bump stops and the mounts. Before choosing a unit, consider the kind of driving the vehicle does and whether the suspension already has enough room.
A gas-charged remote reservoir design suits drivers who need steady damping and easier heat management. The reservoir should be mounted where stones cannot reach it and away from the exhaust. When the spring is replaced, check the spring seat height so the coilover sits at the correct ride height.
- Compare collapsed length with the spring you plan to use
- Confirm reservoir mounting space before ordering
- Check bump stops against the shorter travel
- Recheck alignment after any ride height change
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-02-106 |
| UPC | 70000375580 |
| Series | 2.5 coilover with remote reservoir |
| Body diameter | 2.5 inch |
| Travel | 10.0 inch |
| Shaft | 7/8-inch diameter |
| Reservoir | 2.50 x 14.00 inch |
| Extended length | 29.43 inch |
| Collapsed length | 19.50 inch |
| Mounting | 1/2-inch bolt or heim |
| Finish | Black and zinc |
| Shock type | Hydraulic, gas charged |
Vehicle fitment
The 980-02-106 is universal fit. Compare its 29.43-inch extended and 19.50-inch collapsed lengths and the 1/2-inch mounting ends against your own suspension before ordering.
The 980-02-108 is a longer-travel coilover with its own lengths and is not the same part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Keep the remote reservoir line and body clear of moving suspension parts once the coilover is set, and check the reservoir mounting space first. Gas-charged bodies are pressurized, so any service should go to a qualified shop.
What’s included
The title identifies the remote reservoir version. Confirm the coil spring and hardware you need for your installation.
Not included: Confirm the coil spring and mounting hardware before installation.







