Overview
The Fox Racing Shox 980-24-679 is a single Fox Performance Series smooth body IFP shock with an internal reservoir. It has a 24.65 inch extended length, a 15.55 inch collapsed length and 9.1 inch travel.
Fox designs it as a direct replacement bolt-on unit, and each application is tested for travel and on- and off-road performance. It is a hydraulic, gas charged shock in the 2.0 Shock Series.
Key features
- Smooth body reservoir design
- Internal reservoir construction
- Single shock configuration
- Direct replacement bolt-on design.
- Hydraulic, gas charged 2.0 Shock Series
Preparing for the swap
A shock swap is easier with the vehicle supported safely and the spring load relieved. Penetrating oil on the mounting bolts and a breaker bar can save time when fasteners are seized. Keep the old shock out of the way until the new unit is seated at both mounts.
Because this is a bolt-on replacement, the new unit should line up with the original mounting points. Check that the eyelets are clean and that bushings are seated correctly before tightening. Re-check the fasteners after the first few short drives, since rubber bushings settle slightly as they take load.
- Support the axle before removing bolts
- Use penetrating oil on seized fasteners
- Clean the mounting eyes before fitting
- Re-torque fasteners after initial drives
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-679 |
| UPC | 70000616768 |
| Series | Fox Performance Series |
| Body style | Smooth body |
| Reservoir | Internal |
| Configuration | Single |
| Extended length | 24.65 inch |
| Collapsed length | 15.55 inch |
| Travel | 9.1 inch |
| Shock series | 2.0 Shock Series |
| Shock type | Hydraulic / gas charged |
Vehicle fitment
No vehicle is identified for part number 980-24-679. Only Direct Fit and the 2.0 Shock Series apply, so years, models and trims are not confirmed.
Lay the old shock’s measurements against 24.65 inch extended and 15.55 inch collapsed before fitting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 24.65 inch and 15.55 inch lengths with the shock being removed before installing, since no mounting dimensions are available.
What’s included
Hardware, bushings and other accessories are not part of this package.







