Overview
The Fox Racing Shox 980-24-665 is a 2.0 Performance Series smooth body IFP shock with an internal reservoir, sold as each. It is a gas-charged, hydraulic direct replacement shock in the 2.0 Shock Series.
Fox says its engineers test each application for suspension travel and performance on and off the road. The listed dimensions are 34.95 inch extended, 21.35 inch collapsed and 13.6 inch stroke, but no vehicle is named.
Key features
- Smooth body design
- Internal reservoir
- Hydraulic, gas-charged damping
- 13.6 inch stroke
- Size 2.0 X 6.5
Stroke and length matching
Stroke describes how far the piston travels between its fully compressed and fully extended positions. Matching stroke to the original shock keeps the suspension’s range of motion the same, which matters for bump stop contact and tire clearance at full droop.
Extended and collapsed lengths work together with stroke, so a comparison should include all three. Measure the old shock from eye center to eye center in both positions, then compare those numbers with the figures on the new unit. A shock that is too long can bind the mounts, while one that is too short can leave the suspension without enough travel.
Smooth body IFP shocks are often replaced as single units, but many vehicles need a matched pair on the same axle to keep the ride balanced. Watch for oil on the body, uneven ride height and noise from worn bushings as signs the shock is due for service.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-665 |
| UPC | 70000660302 |
| Product line | 2.0 Performance Series |
| Body | Smooth body |
| Reservoir | Internal |
| Extended length | 34.95 inch |
| Collapsed length | 21.35 inch |
| Stroke | 13.6 inch |
| Size | 2.0 X 6.5 |
| Damping type | Hydraulic / gas charged |
| Sold as | Each |
Vehicle fitment
No make, model or years are named for this shock. Check fit against your year, model and trim before buying, and compare the 34.95 inch extended and 21.35 inch collapsed lengths with the shock you are replacing.
Stroke and lengths should match the shock being replaced, since the part name alone is not enough. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock, sold as each.








