Overview
The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock, part number 983-02-053, is a coilover shock in Fox’s 2.0 Performance Series, built with black anodized 6061-T6 billet aluminum components. Its design is hydraulic and gas charged.
The IFP construction keeps shock oil separate from high-pressure nitrogen through an internal reservoir. The shock uses a race-developed high-flow piston and a redundant sealing pack system. It carries a Direct Fit label, but confirm the match against your vehicle’s year, model and chassis code before installing.
Key features
- 2.0 Performance Series coilover IFP construction
- Black anodized 6061-T6 billet aluminum components
- 5/8″ hard chrome shaft
- Race-developed high-flow piston design
- Redundant sealing pack system
- Internal reservoir separated from high-pressure nitrogen
Before fitting an IFP coilover
An IFP coilover keeps the oil and high-pressure nitrogen apart, which helps the damping stay consistent when the shock heats up on long runs. Because the gas pressure is high, the shock should be handled with care and never opened or disassembled without proper tools and training.
Installed length and spring seat position matter more than most owners expect. Measure the old shock at its installed length before removing it, and confirm the new coilover’s eye style and perch fit the mounts. Coilover changes often affect ride height, so plan for an alignment check afterward.
- Measure installed length before removing the old shock
- Confirm spring seat and perch fit with the new coilover
- Check bump stops for wear when reassembling
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 983-02-053 |
| UPC | 70000618118 |
| Series | 2.0 Performance Series Coilover IFP |
| Shaft diameter | 5/8″ hard chrome |
| Materials | Black anodized 6061-T6 billet aluminum components |
| Shock type | Hydraulic, gas charged |
Vehicle fitment
Carries a Direct Fit label. Confirm fit for your vehicle’s year, model and chassis code before ordering, since no vehicle is identified for this shock.
Shock length, eye style and stroke vary between coilovers, so check the Direct Fit label against your vehicle’s measurements. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the mounting length and eye style with the unit you are replacing. Support the suspension properly when removing or fitting it, since the shock is part of the suspension.
What’s included
Confirm the package contents against your installation before starting. Check whether a coil spring and fasteners are needed for your build.
Not included: Check the package contents when it arrives. Plan to source a coil spring and fasteners if your installation needs them.









