Overview
The Fox 2.0 Performance Series Smooth Body IFP shock, part number 985-24-079, is a rear aluminum shock that fits the 1994–1998 Land Rover Discovery, the 1987–1994 Land Rover Range Rover and a 1993 Land Rover Range Rover Sport.
It is a direct-replacement design meant to bolt in where the original shock mounts, with a listed lift range of 0 to 1 in. The figures are 21.95 in extended, 13.85 in collapsed and 8.1 in of stroke. Fox says its engineers tested each application to maximize suspension travel.
Key features
- Rear mounting position
- Aluminum body
- Internal Floating Piston (IFP) design
- Direct replacement bolt-on fit
- 8.1 in stroke
- Listed lift range of 0 to 1 in.
Rear shock setup for Land Rover
Rear shocks on Land Rover Discovery and Range Rover models carry a large share of the body weight on rough roads and help control the axle when the vehicle rebounds. Because this lift range runs from 0 to 1 inch, the height you drive at matters more than any lift kit. Measure the current rear height before ordering, and compare it with the ride height you expect once the new shock is installed.
Gas charged rear shocks stay pressurized, so keep heat and cutting tools away from the body and dispose of old units with care. Replace them in pairs on the same axle, and inspect the bushings, bump stops and mounting hardware while the old shocks are off, since worn parts can change how the new unit loads.
- Measure ride height before ordering
- Inspect bushings and bump stops
- Replace shocks in pairs on one axle
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-079 |
| UPC | 700007189675 |
| Product line | Fox 2.0 Performance Series Smooth Body IFP |
| Mounting position | Rear |
| Body | Aluminum |
| Extended length | 21.95 in |
| Collapsed length | 13.85 in |
| Stroke | 8.1 in |
| Lift range | 0 to 1 in. |
| Charge type | Gas charged |
| Fitment type | Direct fit |
Vehicle fitment
Listed vehicles: 1994–1998 Land Rover Discovery in the 50th Anniversary Edition, Base, LE, LSE, SD, SE, SE7 and XD trims; 1987–1994 Land Rover Range Rover in the 40th Anniversary Edition, Base, County, County LWB, County SE, Great Divide, Hunter and LSE trims; and the 1993 Land Rover Range Rover Sport, which has no trim named.
Model years outside these ranges and other Land Rover models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your current height first, since the lift range runs from 0 to 1 in. Gas-charged shocks stay pressurized, so keep heat away from the body and never open the cylinder.
What’s included
One rear shock, quantity Each.
Not included: Confirm the mounting bolts and bushings are on hand before starting the installation.









