Select your vehicle

FOX 1-1/2 inch Universal Aluminum Tie Rod Mounting Clamp – 803-02-056

FOX

$77.00In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 6:30 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 1-1/2 inch universal aluminum tie rod mounting clamp
  • Part number 803-02-056 from FOX
  • Universal design, no vehicle named

Description

Overview

The FOX 1-1/2 Inch Universal Aluminum Tie Rod Mounting Clamp, part 803-02-056, is an aluminum clamp sized at 1-1/2 inch for tie rod mounting. FOX has built shock absorbers and racing suspension for more than three decades.

FOX makes shocks and racing suspension products for snowmobiles, bikes, motorcycles, ATVs, UTVs, off-road cars, trucks and SUVs. Confirm the clamp length and finish against your tie rod before ordering.

Key features

  • 1-1/2 inch clamp size
  • Aluminum construction
  • Universal design

Tie rod clamp basics

A tie rod clamp grips a tie rod or a steering component, and its job is to hold the rod position without slipping under load. The clamp bore must match the rod diameter, so measure the rod before buying. Aluminum clamps are lighter than steel and resist corrosion well, but they can deform if overtightened, so tighten the bolts evenly.

Because steering parts carry load, inspect the clamp and rod for cracks, wear or movement after installation. Check that the clamp stays square and the bolts keep their torque after the first few drives. Look for rust, play at the joint or a clicking sound as signs the joint is wearing.

  • Match the clamp bore to the tie rod diameter
  • Tighten clamp bolts evenly
  • Inspect the joint after rough trail use
  • Replace clamp hardware if it is stretched or corroded

Specifications

Brand FOX
Part number 803-02-056
Type Tie rod mounting clamp
Size 1-1/2 inch
Material Aluminum

Vehicle fitment

This is a universal design, so confirm the clamp fit for your vehicle’s year, model and trim before ordering.

Check the clamp size against your tie rod before installing. Confirm your vehicle’s year, model and trim before ordering.

Questions & Answers

What size is the tie rod clamp?

The clamp is 1-1/2 inch in size. It is an aluminum universal tie rod mounting clamp, part 803-02-056, and the size should be matched to the tie rod it holds.

Is it universal?

Yes. It is a universal design, so it is not built for one vehicle. Check the clamp size and fit against your tie rod before installing it on any truck.

What is the clamp made from?

The clamp is aluminum and sized at 1-1/2 inch. Confirm the length and finish against your tie rod setup before ordering, so the clamp sits correctly on the rod.

Can a universal clamp be used on any tie rod?

Only if the bore and bolt layout suit the rod. Measure the rod diameter and confirm the clamp fits the mounting location before installation. A universal design does not replace a check of the rod and joint.

How tight should the clamp bolts be?

Tighten them evenly to a firm, even torque and recheck after the first few drives, since settling can loosen a clamp. Overtightening can crack or deform aluminum.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon