Overview
The Fabtech FTS899181 is a Dirt Logic 2.0 billet reservoir clamp, part number FTS899181, for the Dirt Logic 2.0 reservoir and its shock body.
Fabtech gives this clamp a shock body to reservoir range of 2.0 to 2.25 inch. Made from 6061 aluminum with a black anodized finish, it adds a finished look to the shock system and carries a Universal Fit tag.
Key features
- Clamp for the Dirt Logic 2.0 reservoir
- Shock body to reservoir range of 2.0 to 2.25 inch
- Black anodized finish
- Constructed of 6061 aluminum
Choosing a clamp size
Clamp sizing starts with measuring the shock body where the reservoir attaches. A clamp that is too loose lets the reservoir walk during hard landings, while an overly tight fit can crack a reservoir housing. Because this clamp covers a 2.0 to 2.25 inch range, a caliper measurement taken before ordering helps confirm the fit.
Clamps are often replaced along with the reservoir hose and the mounting bolts, since worn hardware tends to fail at the same time. Check that the anodized surface is not chipped where it contacts the shock, and replace the clamp if the aluminum shows cracks or deformation. Keep the hose routed away from the clamp edges so chafing does not start at the contact point. Retighten after the first few outings.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS899181 |
| UPC | 674866028951 |
| Material | 6061 aluminum |
| Finish | Black anodized |
| Clamp size | 2.25 in. |
| Shock body to reservoir | 2.0 to 2.25 inch |
| Compatible reservoir | Dirt Logic 2.0 |
| Quantity | One individual clamp |
Vehicle fitment
Not vehicle-specific. The Universal Fit tag names no make, model or year, so fit rests on the Dirt Logic 2.0 reservoir and a shock body within the 2.0 to 2.25 inch range.
The Dirt Logic 2.25 clamps are separate part numbers, FTS899061 and FTS899071, and do not replace this one.
What’s included
One individual clamp.
Not included: the Dirt Logic 2.0 reservoir and shock body.









