Overview
The Fishbone Offroad Stubby Front Winch Bumper, part FISFB22178, is a powder-coated steel front winch bumper for the 2020–2026 Jeep Gladiator JT and the 2018–2026 Jeep Wrangler JL. Its narrow design hugs the bottom of the grille, which Fishbone says lets the tires reach an obstacle before the bumper does.
The bumper was designed so factory fog lights can be reused. It is ready to accept a winch and includes a fairlead mount and a hoop. Fishbone includes the hardware to install it and two D-rings for recovery.
Reusing the factory fog lights is the design choice here, and it suits owners who want to keep the factory lighting. The bumper is ready for a winch and includes the fairlead mount.
Key features
- Narrow stubby design that hugs the bottom of the grille
- Designed to reuse factory fog lights
- Ready to accept a winch, with a fairlead mount
- Hoop and two D-rings included
- Light mounts included
Winch and recovery setup
A winch bumper carries the load from recovery pulls, so the mounting points and bumper frame deserve regular checks. A fairlead guides the cable onto the winch drum and reduces cable wear at the bumper opening. Match the winch’s mounting pattern and weight rating to the fairlead mount before buying, and confirm the power cable routes clear of the radiator and steering.
Recovery straps and D-rings work with the winch as a system. Shackles and straps should be rated for the load they will carry, and D-rings should be inspected for cracks or bent pins before each use. Owners who keep factory fog lights should confirm the wiring path before fitting the bumper.
- Check the fairlead for burrs or cracks
- Inspect D-rings for bent pins
- Keep the winch cable clear of the bumper edge
Specifications
| Brand | Fishbone Offroad |
|---|---|
| Part number | FISFB22178 |
| Finish | Powder coat |
| Material | Steel |
| Width | Stubby |
| Position | Front |
| Winch mount | Compatible, with fairlead mount |
| Hoop | Included |
| Stinger | Not included |
| Receiver hitch | Not included |
| D-ring mounts | 2 included |
| Light mounts | Included |
| Fitment | 2020–2026 Jeep Gladiator JT and 2018–2026 Jeep Wrangler JL |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator JT and the 2018–2026 Jeep Wrangler JL.
The list does not include the Wrangler JK or earlier generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fishbone includes the hardware needed for installation. Because the design reuses the factory fog lights, confirm their wiring before fitting the bumper.
What’s included
Front stubby winch bumper with hoop, fairlead mount, two D-rings and installation hardware.
Not included: A winch is not included with the bumper.


























