Overview
The ARB Bondi Stubby front bumper, part 3450470, is a steel front bumper for the Jeep Wrangler JL and Gladiator JT. ARB designed it for the new JL and JT, with a single-piece press formed centre pan and pulse welded uprights.
The upswept outer wings give the bumper a shape intended to allow maximum clearance for aftermarket wheels and tires. The bumper has an integrated bash plate along its base to guard the lower front of the vehicle.
A low slung, forward-facing 3-inch tube hoop runs along the top of the bumper. The hoop is set low to protect the most vulnerable front components. Significant protection and aesthetic appeal were the focus of the design.
Key features
- Single-piece press formed centre pan
- Pulse welded uprights
- Upswept outer wings for aftermarket wheel and tire clearance
- Integrated bash plate along the base
- Low slung, forward-facing 3-inch tube hoop
Front bumper weight and clearance
A steel front bumper with a hoop and bash plate adds weight to the front axle, which changes steering feel and braking under load. Think about what else is carried at the front, such as a winch or lights, before deciding on the combined weight. Check that the hood opens and closes freely after fitment, since the added components can alter the clearance above the bumper.
Front sensors and cameras can move or lose alignment when a bumper is replaced. Check their mounting and function after installation, and confirm any driver assistance features still work as expected before relying on them off road.
- Consider the combined weight of front accessories
- Check hood clearance after fitting
- Test front sensors and cameras after installation
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 3450470 |
| Position | Front |
| Construction | Single-piece press formed centre pan, pulse welded uprights |
| Bash plate | Integrated, along the base |
| Hoop | 3-inch low slung tube hoop, forward facing |
| Outer wings | Upswept, for clearance with aftermarket wheels and tires |
| Installation type | Direct fit |
Vehicle fitment
The bumper is made for the 2020-2026 Jeep Gladiator and the 2018-2026 Jeep Wrangler JL.
It fits the 2018-2026 Wrangler JL and the 2020-2026 Gladiator. Wrangler JK and earlier Wrangler models are outside this fit. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The steel front bumper with its integrated bash plate and forward-facing 3-inch tube hoop.










