Select your vehicle

ARB 4X4 Accessories Classic Deluxe Combination Bumper – 3450440

ARB 4x4 Accessories

Shop Jeep Wrangler JL Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2020–2026 Jeep Gladiator and 2018–2026 Jeep Wrangler JL
  • Full width steel bumper with outer wings for factory flares and tires up to 37-inch
  • Winch platform for most low-mount Warn winches up to 10,000 lb
  • Welded 0.8-inch recovery points and two jack points
  • Integrit textured black powder coat with zinc pre-treatment

Description

Overview

The ARB Classic Deluxe combination bumper, part 3450440, is a full width steel front bumper for the Jeep Wrangler JL and Jeep Gladiator. ARB developed it as the JL version of the Wrangler JK Deluxe bumper, designed to give full width protection while staying practical and stylish.

The outer wings are shaped for both Rubicon and non-Rubicon factory flares and can clear a tire up to 37-inch. The bumper includes brackets that hold factory halogen or LED fog lights, which helps the front keep a clean factory look.

For recovery, the bumper has a winch mount platform for most low-mount Warn winches up to 10,000 lb, plus welded 0.8-inch recovery points for snatch or double-line winch pulls. Jack points in the center pan are designed to lift the JL with the ARB JACK or a mechanical recovery jack.

The main tube has antenna tabs that can carry a communication antenna or additional driving lights. The bumper is zinc pre-treated for corrosion resistance and finished in an Integrit textured powder coat with an ultra-low sheen matte look. Integrit is formulated to resemble automotive grade black plastic on steel or alloy, and the finish is visually similar to the factory JL flares.

Key features

  • Full width protection with outer wings for Rubicon and non-Rubicon factory flares
  • Clearance for a tire up to 37-inch
  • Brackets for factory halogen or LED fog lights
  • Winch mount platform for most low-mount Warn winches up to 10,000 lb
  • Welded 0.8-inch recovery points for snatch or winch double line pulls
  • Jack points in the center pan for the ARB JACK or a mechanical recovery jack
  • Antenna tabs on the main tube for communication antennas or driving lights
  • Zinc pre-treatment and Integrit textured powder coat

Before you install

A front bumper changes more than the look of a Jeep. It carries the weight of a winch, affects approach angles and sits in front of the radiator and cooling system. Before installing a steel bumper, remove any factory parts that interfere and check that wiring for fog lights and light bars is routed clear of the new mounting points.

Steel bumpers add weight at the front, so suspension and steering components may need closer inspection after installation. Recheck mounting bolts after the first few trail runs and after any hard impact. Look at the winch platform and recovery points for cracks or loose welds, and keep the jack points clear of mud so they stay usable.

  • Check the bumper’s weight against your suspension setup
  • Confirm winch rope and fairlead alignment
  • Inspect the powder coat for chips and touch up early
  • Keep rated recovery shackles and straps on hand

Specifications

Brand ARB 4×4 Accessories
Part number 3450440
Position Front
Width Full
Material Steel
Finish Textured black, Integrit powder coat, ultra-low sheen matte
Corrosion protection Zinc pre-treatment
Winch mount Platform for most low-mount Warn winches up to 10,000 lb
Recovery points Welded 0.8-inch recovery points
Jack points Two, in the center pan
Tire clearance Outer wings clear up to a 37-inch tire
D-ring mounts Included
Light mounts Not included, brackets for factory fog lights
Installation type Direct fit

Vehicle fitment

It fits the 2020–2026 Jeep Gladiator and the 2018–2026 Jeep Wrangler JL. The outer wings are shaped for the factory flares on those vehicles.

It fits only the 2018–2026 Wrangler JL and the 2020–2026 Gladiator trims covered here. Confirm fit for your vehicle’s year, model and trim before ordering, including Wrangler JK and earlier Gladiator years.

Installation notes

Confirm the winch you plan to mount is a low-mount style rated up to 10,000 lb before installation, since the platform is built for that size. The outer wings suit both Rubicon and non-Rubicon factory flares, so check which flares your Jeep has.

What’s included

The steel full width bumper with its winch mount platform, welded recovery points, jack points, outer wings and antenna tabs.

Not included: Fog lights, LED light bars, cube lights and a winch.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–202680th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys, Willys Sport
Jeep Wrangler (JL)2018–202680th Anniversary (2-Door), Freedom (2-Door), Islander (2-Door), Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 80th Anniversary (4-Door), Unlimited Freedom (4-Door), Unlimited High Altitude (4-Door), Unlimited High Altitude 4xe, Unlimited Islander (4-Door), Unlimited Moab (4-Door), Unlimited Rubicon (4-Door), Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Sahara (4-Door), Unlimited Sahara 4xe, Unlimited Sahara Altitude (4-Door), Unlimited Sport (4-Door), Unlimited Sport Altitude (4-Door), Unlimited Sport S (4-Door), Unlimited Willys (4-Door), Unlimited Willys Sport (4-Door), Willys (2-Door), Willys Sport (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the ARB Classic Deluxe bumper fit a Wrangler JK?

No. It is developed for the Jeep Wrangler JL and fits the 2018–2026 Wrangler JL and 2020–2026 Gladiator. Confirm your year and model before ordering for any other Wrangler.

Can I mount a winch on this bumper?

The bumper has a winch mount platform for most low-mount Warn winches up to 10,000 lb. A winch is not included, so check the winch's mounting style and rating against the platform.

Does the bumper keep factory fog lights?

Yes. The bumper includes brackets for retaining both factory halogen and LED fog lights, which helps keep a clean OE look. The fog lights themselves are separate parts.

Does this bumper need a winch to be useful?

No. The bumper works as a full width front guard without a winch. The winch platform is for owners who plan to mount one, and a winch is not included with the bumper.

How do I keep the powder coat in good condition?

Rinse off mud and salt after trail use, then clean with mild soap. Touch up chips promptly so the steel underneath does not start to corrode, and inspect the finish around the welds.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JL Bumpers on Amazon