Overview
The Fishbone Offroad FB21074 is a bumper to frame tie-in for the rear bumper on the 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Jeep Wrangler (LJ). Its job is to strengthen the rear bumper mount by tying it to the frame.
It is made from 3/16 inch steel that is laser cut and press-formed for strength. The body mount bolts remain accessible, and the finish is a black textured powder coat.
Key features
- Strengthens the rear bumper mount by tying it to the frame
- Made from 3/16 inch steel
- Laser cut and press-formed for strength
- Designed to allow access to the body mount bolts
- Black textured powder coat finish
Checking the frame and mounts
A bumper to frame tie-in ties the rear bumper mount to the frame, so the bumper does not twist or pull away under load. Because the tie-in sits at a structural point, the mount, the frame section and the fasteners all carry the stress. Inspect those areas for cracks, rust or loose hardware before and after fitting.
Before fitting, clean the frame and mounting surface so the tie-in seats flat, and check that the body mount bolts are reachable. Fasten the hardware evenly and recheck it after the first off-road trips. A tie-in that flexes or shows rust at the weld points should be inspected and replaced.
- Check the frame section for rust or cracks
- Clean the surface before fitting
- Retighten fasteners after the first trips
Specifications
| Brand | Fishbone Offroad |
|---|---|
| Part number | FISFB21074 |
| Material | Steel, 3/16 inch thick |
| Finish | Black textured powder coat |
| Receiver hitch included | No |
| D-ring mount included | No |
| Tire carrier included | No |
| Fitment type | Direct fit |
Vehicle fitment
The fitment data covers the 2004–2006 Jeep Wrangler (LJ), Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ), including the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X versions.
The fitment data does not include the Wrangler JK or the Wrangler YJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the design leaves the body mount bolts accessible, fit the tie-in with those bolts in view so the connection to the frame is complete.
What’s included
Not included: a receiver hitch, a D-ring mount or a tire carrier.










