Overview
The Firestone Ride-Rite Sport-Rite 7105 is a rear air helper spring, a replacement bag with a 70mm reversible sleeve, 6 in. height and 3.5 in. diameter. It is rated for a 1000 lbs. max load at 100 psi.
Air helper springs add support when a vehicle carries heavy or off-center loads, which helps keep the ride level. This rear bag is a universal fit, so check its dimensions against your suspension before installing.
Key features
- Helps keep the vehicle level under changing loads
- Levels off-center loads
- Helps reduce suspension fatigue
- Air adjustments can improve ride quality
- Helps reduce bottoming out
- Helps increase vehicle stability
- Reversible 70mm sleeve
Maintaining the air system
Rear air helper springs carry part of the load that the factory springs were not designed to handle alone. When a bed is full or a trailer hitch is loaded, the bag pushes back against the axle and keeps the rear end from dropping. On a smooth road that means steadier handling, and on rough terrain it can limit how far the suspension bottoms out. The bag works best when its air pressure matches the weight it is carrying.
Choosing a replacement starts with the mounts. Compare the bag’s sleeve, height and diameter with your original unit, and make sure the air fitting reaches your existing lines. Many owners replace the bag together with the shocks or bump stops, since those parts wear at similar rates. Leaks often start at the fitting rather than the bag, so check both when you install a new one.
After installation, inspect the bag every few months. Look for cracks, bulges, or chafing where it rubs the frame or axle. Keep the inflation within the rated range, and drain moisture from the air line when the system is serviced.
- Check mount clearance at full inflation
- Test fittings with soapy water after installation
- Inspect for chafing at the frame and axle
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 7105 |
| UPC | 767555107980 |
| Product line | Sport-Rite |
| Position | Rear |
| Style | 70mm |
| Sleeve | 70mm reversible |
| Height | 6 in. |
| Diameter | 3.5 in. |
| Max load | 1000 lbs. at 100 psi |
| OEM number | W217607105 |
| Bag type | Replacement bag |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit rear air helper spring, so it is not built for one specific vehicle. Measure your mounting points and the 6 in. height against your setup before fitting it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
This is a replacement bag. Check the package contents against your installation for any hardware or air fittings you need.









