Overview
The Firestone Ride-Rite 6781 is a double convoluted air helper spring that adds leveling support to an existing air suspension. It has a 6.6 Inches air bag diameter, a 5 Inches-6.5 Inches installed height and an 8.3 Inches maximum extended height.
It keeps a vehicle level under off-center loads and reduces bottoming out and suspension fatigue. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Keeps the vehicle level under off-center loads
- Air adjustments are said to improve the ride
- Reduces bottoming out and suspension fatigue
- It helps increase vehicle stability.
- Double convoluted air bag design
Setting height and load
An air helper spring works alongside the vehicle’s existing springs. When the air bag is inflated, it carries part of the load, which helps the rear end sit level when cargo, a trailer tongue or passengers shift weight to one side. Its effect depends on how the bag is set, so the pressure you run matters as much as the part itself.
Before fitting, measure the space the bag occupies at rest and at full extension. Leave room so the bag does not rub on the frame, brackets or axle at either end of its travel. Route air lines away from heat, sharp edges and moving parts. A worn bag usually shows slow leaks, uneven ride height or cracking in the folds, and those signs point to replacement.
- Inspect the folds for cracks and bulges
- Check fittings for air leaks with soapy water
- Re-check the mounts after the first few trail runs
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Model | 6781 |
| UPC | 767555108499 |
| Air bag type | Double Convoluted |
| Air bag diameter | 6.6 Inches |
| Installed height | 5 Inches-6.5 Inches |
| Max extended height | 8.3 Inches |
| Max compressed height | 8.3 Inches |
| Air inlet size | 1/4 NPT |
| Mounting type | (2) 3/8″-16 studs top, (1) 3/8″-16 blindnut bottom |
| Fitment | Direct Fit |
Vehicle fitment
Confirm the mounting pattern and height range against your vehicle before choosing this helper spring.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The top mount uses two 3/8″-16 studs and the bottom uses one 3/8″-16 blindnut, so check those points against your vehicle’s brackets. Set the installed height within the 5 Inches-6.5 Inches range.
What’s included
Check the package contents against your installation before starting.











