Overview
The Firestone Coil-Rite rear air spring kit, part number FIR4185, is a manual fill air spring kit for 2 and 4WD Ram 1500 trucks. The air springs fit inside the existing coil springs to create a variable spring rate, and Firestone says they level the vehicle and help braking and handling under heavy loading and rough road conditions.
The kit is rated for a load capacity of 2100 lbs and an operating air pressure range of 5 PSI minimum to 70 PSI maximum. The springs are made of elastic polyurethane and operate from -40F (-40C) to 180F (82C). Spring performance changes by adding or releasing air, much like inflating a tire. The kit installs without drilling.
Key features
- Fits inside existing coil springs for a variable spring rate
- Manual fill type
- 2100 lbs load capacity
- 5 PSI minimum and 70 PSI maximum air pressure
- Polyurethane construction
- No-drill installation
Setting the right air pressure
Air pressure controls how stiff the air springs feel, so it should be set with the truck’s load in place. Start with the pressure that suits the load and then adjust in small steps. Fill slowly with a manual pump or compressor and watch the gauge so the setting stays inside the range for the kit.
Check the truck’s level before and after each change. If the rear sits low when unloaded, reduce the air a little and check again. If the ride feels harsh, the pressure may be higher than the load needs. Small changes make it easier to find a comfortable setting.
Air springs also lose pressure slowly over time, so check the gauge periodically. Watch the valves and fittings for leaks, and keep dust and road grime off the fill valve to help it seal.
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | FIR4185 |
| Product line | Coil-Rite |
| Position | Rear |
| Fill type | Manual |
| Load capacity | 2100 lbs |
| Air pressure | 5 PSI minimum, 70 PSI maximum |
| Operating temperature | -40F (-40C) to 180F (82C) |
| Material | Durable, elastic polyurethane |
| Drilling | No drill installation |
| Drive type | 2WD and 4WD |
Vehicle fitment
It fits the 2009–2010 Dodge Ram 1500 in Laramie, SLT, ST, Sport, TRX and TRX4 models, the 2011–2018 Ram 1500 across its cab and trim packages, and the 2019 Ram 1500 Classic in Big Horn, Express, Lone Star and Special Service models.
The list covers Ram 1500 pickups only, so the Ram 2500 and 3500 and the 2008 and older Ram 1500 are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit installs without drilling, so the springs go in with the existing hardware. Check the air line route and the fill valve position before setting the pressure.
What’s included
One rear Coil-Rite air spring kit, part number FIR4185, for manual air fill.








