Overview
The Firestone Ride-Rite 6869 is a single convoluted air helper spring with a 7.2 Inches air bag diameter. It is a heavy duty leveling part rated for up to 5000 lbs of leveling capacity and is designed to improve vehicle stability.
It is marked Universal Fit with a replacement bag type, so no year, make, model or trim is attached to it. Check the installed height and stud layout against your suspension before installing.
Key features
- Single convoluted air bag design
- Up to 5000 lbs of leveling capacity.
- Aims to keep the vehicle level under off-center loads
- Reduces bottoming out and suspension fatigue
- Its design aims to steady the vehicle under load.
Single convoluted bags
A single convoluted bag has one fold in its wall, which generally makes it a lower profile unit than a double convoluted design. That can matter where clearance around the axle or frame is tight. The trade-off is that the bag’s travel and load behavior depend closely on its installed height, so the height range needs to be set carefully.
During inspection, look at the fold and the bead where the bag meets the end plates. Rubbing marks, flattened areas and bulges usually mean the bag is touching something or is over inflated. Keep the air line clear of the frame and check the fittings whenever the bag is serviced.
- Keep the installed height within its range
- Look for rubbing marks on the fold
- Check clearance at full extension
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 6869 |
| UPC | 767555100882 |
| Air bag type | Single Convoluted |
| Air bag diameter | 7.2 Inches |
| Installed height | 5 Inches-6 Inches |
| Max extended height | 6.5 Inches |
| Max compressed height | 6.5 Inches |
| Air inlet size | 1/4 NPT |
| Mounting type | (2) 3/8″-16 studs top, (1) 3/8″-16 blindnut bottom |
| Leveling capacity | Up to 5000 lbs |
| Bag type | Replacement Bag |
| Fitment | Universal Fit |
Vehicle fitment
Firestone marks this helper spring Universal Fit, so it is not tied to a specific vehicle. Fit depends on the mounting studs and installed height, so compare those with your current suspension.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two top mounts are studs and the bottom is a blindnut, so the bracket layout needs to match. The installed height runs 5 Inches-6 Inches with a 6.5 Inches maximum extension, so check clearance at full extension.
What’s included
Confirm the included items against your installation plan before fitting.











