Overview
The Firestone Ride-Rite 7882 is a replacement air helper spring with a double convoluted air bag, a 6.6 inch bag diameter and a 1/2 NPT air inlet. The brand describes its heavy duty air helper spring kits as providing up to 5000 lbs. of leveling capacity.
The bag has an installed height of 5 to 6.5 inches and a maximum extended and compressed height of 8.3 inches. It is a universal fit, so check the mounting studs against your vehicle before installing.
Key features
- Double convoluted air bag design
- Keeps the vehicle level and levels off-center loads
- Helps reduce suspension fatigue and bottoming out
- Air adjustments can improve ride quality
- Helps increase vehicle stability
- Heavy duty kits rated for up to 5000 lbs. of leveling capacity
Leveling and load support basics
An air helper spring adds support under load by filling the bag with air. It can help keep the rear level when cargo or a trailer hitch load shifts the weight, and it can ease the sag that comes with heavy use. The bag works with a compressor, valves and lines, so the whole system should be checked as one unit.
Air helper springs need regular checks. Look for leaks at the inlet, watch for uneven inflation between sides, and make sure the bag is not rubbing against nearby parts. Mounting studs and brackets should be inspected for cracks or loose fasteners at the same time.
- Check the inlet for leaks with soapy water
- Compare inflation between the left and right sides
- Inspect studs and brackets for loose fasteners
- Keep the bag clear of rubbing contact
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 7882 |
| UPC | 767555110881 |
| Air bag type | Double convoluted |
| Air bag diameter | 6.6 inches |
| Installed height | 5 to 6.5 inches |
| Max extended height | 8.3 inches |
| Max compressed height | 8.3 inches |
| Air inlet size | 1/2 NPT |
| Mounting type | (2) 3/8 inch-16 studs on top, (1) 3/8 inch-16 blindnut on the bottom |
| Bag type | Replacement bag |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is listed, and no vehicle, year or chassis is named. This bag is not built for a single vehicle, so match the 5 to 6.5 inch installed height and the stud pattern to your suspension.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The bag is a replacement air bag. Check the package contents against your installation before starting, including any air line fittings you need beyond the 1/2 NPT inlet.












