Overview
The Firestone Ride-Rite Rear Air Helper Spring Kit 2407 is a rear air helper spring kit for leaf spring mounts that adds adjustable air support to the rear of a vehicle. Firestone Ride-Rite says these kits help keep the vehicle level under load and reduce bottoming out.
It uses double convoluted air springs with manual inflation and is built for bolt-on installation with no drilling required. A lift kit may need spacers.
Key features
- Keeps the vehicle level and helps level off-center loads
- Helps reduce suspension fatigue and bottoming out
- Double convoluted air spring design
- Bolt-on installation with no drilling required
- Manual inflation, with an optional height sensor
- Compatible with lift kits, which may require spacers
- Provides up to 5000 lbs of leveling capacity
Double convoluted air springs
Double convoluted bags have two folds, which gives a softer spring rate at light loads and firmer support as the bag compresses. That suits pickups and vans that carry changing loads. Check the bag for abrasion where it rubs the frame or axle bracket, and keep the bag away from sharp edges during installation.
A leaf spring mount ties the air helper to the spring pack, so the spring’s condition matters. Inspect leaves, clips and bushings before fitting, and recheck bolts after the first few trips. If the vehicle sags even when unloaded, the bag, valves or mounts may need attention.
- Check bag folds for abrasion
- Inspect leaf spring clips and bushings
- Recheck bolts after the first few trips
- Watch for slow air loss at valves
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Model | 2407 |
| UPC | 767555112809 |
| System type | Leaf spring mount |
| Bag/spring type | Double convoluted |
| Installation type | Bolt on, no drilling required |
| Inflation method | Manual inflation |
| Load capacity | 3,200 lbs per pair |
| Leveling capacity | Up to 5000 lbs |
| Height sensor | Optional |
| Lift kit compatibility | Yes, may require spacers |
Vehicle fitment
Make sure the year, model and trim match your vehicle before buying. It works as a front or rear application and a direct fit rear air bag.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is designed as a bolt-on installation with no drilling required. Because a lift kit may require spacers, confirm spacer needs against your suspension setup before installing the air springs.
What’s included
The kit is the rear air helper spring set itself. The compressor and gauges are not included.
Not included: Compressor and gauges, which are sold separately. The height sensor is optional.









