Overview
The Firestone Ride-Rite 2362 is a rear air helper spring kit built for leaf spring mounts, with double convoluted bags rated at 4,800 lbs per pair. Installation requires drilling into the mounts. Heavy duty Ride-Rite kits provide up to 5000 lbs of leveling capacity.
Fit to a specific truck, van or SUV needs confirmation before choosing this leaf spring mount kit.
Key features
- Designed for leaf spring mounts
- Drilling is required for installation
- Double convoluted bags for air leveling
- Helps keep the vehicle level under off-center loads
- Manual inflation with an optional height sensor
- Lift kit compatibility: yes, may require spacers
Drilling and leaf spring mounts
Leaf spring mounts give an air helper bag a different attachment point than an axle mount, so the install is usually more hands-on. Drilling into the mount requires marking the holes carefully, checking for clearance around the axle, wiring and brake lines, and confirming the bolt pattern lines up before final tightening. Measure twice before drilling.
After the install, check that the bag sits square and that the leaf spring can move freely through its range. Recheck the fasteners after the first few drives, since new holes can settle. If you add spacers for a lift, recheck ride height, and keep the air lines clear of heat sources and moving parts.
- Mark and punch holes before drilling
- Deburr holes to protect the mount
- Check clearance around the axle and wiring
- Recheck fasteners after the first drives
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2362 |
| UPC | 767555110157 |
| System type | Leaf spring mount |
| Bag/spring type | Double convoluted |
| Load capacity | 4,800 lbs per pair |
| Installation | Requires drilling |
| Inflation method | Manual |
| Height sensor | Optional |
| Lift kit compatibility | Yes, may require spacers |
Vehicle fitment
Mounting depends on the exact year, make, model and trim, so confirm those before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan for drilling into the leaf spring mounts before starting. Recheck ride height after installing, since a lift may need spacers.
What’s included
The kit centers on the rear air helper spring bags. Verify the brackets, hardware and air line on arrival.
Not included: air compressor and gauges. The height sensor is optional.









