Overview
The Firestone Ride-Rite Coil-Rite Front Air Helper Spring Kit 4100 is a front in-coil air helper spring for coil spring suspensions on 1963–1991 Chevrolet and GMC trucks, vans and SUVs. Each air spring fits inside an existing coil spring to create a variable spring rate, which Firestone says levels the vehicle and supports braking and handling under heavy loading and adverse road conditions.
Each pair is rated at 1,000 lbs. The operating range runs from -40F (-40C) to 180F (82C). The kit is not compatible with lift kits or a height sensor, and inflation is manual.
Key features
- Installs inside existing coil springs to add a variable spring rate
- Front position for coil spring suspensions
- Rated 1,000 lbs per pair
- Operating range of -40F (-40C) to 180F (82C)
- No drilling required
- Manual inflation; height sensor not compatible
In-coil installs and coil springs
In-coil air helpers sit inside the coil spring, so they add a variable spring rate without a separate mounting bracket. This design suits older coil spring trucks that need leveling. The front suspension work is more involved than a rear install, so an installer comfortable with coil suspensions is a sensible choice.
Old coil springs can settle or crack over time, so inspect them before adding an air spring inside. Check the upper and lower seats, look for rust and corrosion, and keep the inflation valve accessible. Set pressure with the truck loaded, and recheck it after changes in cargo or towing to keep the front end balanced.
- Inspect coil springs for cracks or rust
- Keep the valve accessible
- Recheck pressure after load changes
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 4100 |
| UPC | 767555020630 |
| Position | Front |
| Front or rear application | Front |
| System type | In coil |
| Bag or spring type | Coil type bag |
| Type of system | Air bag |
| Load capacity | 1,000 lbs per pair |
| Installation type | No drilling required |
| Inflation method | Manual |
| Height sensor | Not compatible |
| Lift kit compatible | No |
| Operating temperature | -40F (-40C) to 180F (82C) |
Vehicle fitment
Based on the manufacturer fitment list, this kit covers these Chevrolet and GMC models, with trims as named:
- Chevrolet: Blazer, C10, K5 Blazer, P30 Series, R10, R1500 Suburban, R2500 Suburban, S10 Blazer
- GMC: C15/C1500 Suburban, C1500, C1500 Suburban, C25/C2500 Suburban, C2500, C2500 Suburban, Jimmy, R1500, R1500 Suburban, R2500, R2500 Suburban, S15 Jimmy
Model years are limited to the ranges in the list, so years after 1991 are not covered. Several models appear for single years or trims only, such as the 1987 Chevrolet R10. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the air springs fit inside the existing front coil springs, the work involves the front suspension, so an installer comfortable with coil suspension is a sensible choice. Set inflation with the load in mind, and recheck pressure after any change in cargo or towing.
What’s included
Front in-coil air helper springs. Confirm the hardware and other contents against your installation before starting.
Not included: Compressor and gauges, which are optional.









