Overview
The Firestone Ride-Rite rear air helper spring kit, model 2286, is an axle-mount air helper kit rated at 4,800 lbs of load leveling capacity per pair. Its double convoluted air bags support the rear of a vehicle carrying heavy or off-center loads, which helps keep the vehicle level and limits bottoming out.
The bags are inflated manually, so an air compressor and gauges are needed to set pressure, and both are sold separately. The kit is lift kit compatible, though spacers may be needed. The model rating is 4,800 lbs per pair, so plan loads around that figure.
Key features
- Axle-mount rear air helper spring kit
- 4,800 lbs of load leveling capacity per pair
- Double convoluted air bags
- Bolt on, no drilling required
- Manual inflation for adjusting rear ride height
- Works with lift kits when spacers are used
- Height sensor available as an option
Bag wear and rubber care
Double convoluted bags flex every time the suspension moves, so the rubber takes repeated stress over its life. Keep them clean and free of road salt, mud and debris that can wear the surface. Check the areas where the bag contacts the mounts, since rubbing there is an early sign of trouble and is easier to fix before a leak develops.
Air loss is the most common sign of a bag that needs attention. Test the bags and fittings with a soapy solution after installation and again after the first loaded trip. A bag that sits uneven when pressure is set, or that drops overnight, should be inspected closely before it is used under a heavy load.
- Clean bags after muddy or salty trips
- Look for rubbing at the mounts
- Test fittings with soapy water
- Inspect after the first loaded trip
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Model number | 2286 |
| UPC | 767555102992 |
| System type | Axle mount |
| Load capacity | 4,800 lbs per pair |
| Bag type | Double convoluted |
| Installation type | Bolt on, no drilling required |
| Inflation method | Manual |
| Height sensor | Optional |
| Lift kit compatibility | Yes, may require spacers |
| Compressor and gauges | Sold separately |
Vehicle fitment
Match your year, model and trim to the kit before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Spacers may be needed on lifted vehicles, so measure the gap between the bag mounts and the axle after installation. Set pressure gradually and recheck ride height on both sides.
What’s included
Kit contents are not broken out.
Not included: the compressor, gauges and optional height sensor.









