Overview
Firestone Ride-Rite’s Coil-Rite 4170 is a rear air helper spring kit that adds adjustable leveling to coil-sprung vehicles. The medium duty polyurethane design is rated at 500 lbs per pair.
The 4170 installs without drilling and is inflated manually. Confirm fitment for your vehicle’s year, model and trim before ordering.
Key features
- Listed to aid stability, steering and balance
- Listed to help prevent bottoming out and keep the ride level
- Listed to help keep headlights aimed properly on the road
- Listed to help reduce tire wear
- Polyurethane air springs in medium duty construction
- Adjustable support through manual inflation
Keeping a coil helper working
A coil helper works with the existing coil spring, so the condition of the coil and shock makes a noticeable difference. When the shock is worn, the rear can bounce after bumps even with the helper set correctly. Checking the shock and the coil seats before installation gives the helper a stable base to work from.
Manual inflation means the pressure is set by hand, so check it when the load changes and after long drives. Look at the polyurethane springs for surface cracks or rubbing, and make sure the mounts remain tight. Inspect the air fittings for slow leaks, since a small loss over time can change the rear height without warning.
- Inspect shocks and coil seats before fitting
- Recheck pressure after load changes
- Look for rubbing where the spring meets the coil
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Product number | 4170 |
| UPC | 767555116692 |
| System type | In-coil air helper |
| Load capacity | 500 lbs per pair |
| Bag/spring type | Coil-type bag |
| Installation type | No drilling required |
| Inflation method | Manual |
| Compressor and gauges | Optional, not included |
| Height sensor | Not compatible |
| Lift kit compatible | No |
Vehicle fitment
It is a direct fit rear air bag kit for coil-sprung suspensions. Verify that your vehicle’s year, model and trim match the kit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting needs no drilling, and pressure is set by hand because inflation is manual. A compressor and gauges are optional and are not part of the kit. Put the vehicle on stands before working near the rear springs.
What’s included
The kit is rated at 500 lbs per pair. Check the package contents against your installation before starting.
Not included: Compressor and gauges (optional).









