Overview
The Firestone Ride-Rite air helper spring kit 2249 is a rear axle-mount kit with double convoluted bags, rated 4,800 lbs per pair. Air helper springs add load-leveling support to the rear suspension, so a loaded vehicle can sit closer to level. Heavy duty Ride-Rite kits provide up to 5000 lbs of leveling capacity while improving stability.
The kit is a direct fit rear air bag kit, so confirm fit for your vehicle’s year, make, model and trim before choosing it.
Key features
- Keeps the vehicle level when carrying off-center loads
- Helps reduce suspension fatigue and bottoming out
- Air adjustment improves ride comfort under load
- Supports vehicle stability with heavy loads
- Bolt-on axle mount with no drilling required
- Manual inflation, with an optional height sensor
Choosing between air helper kits
Air helper kits differ in how they mount, how they are inflated and what extras come with them. An axle mount like this one attaches to the rear axle area, which often means a simpler install than a kit that requires new frame holes. Manual inflation keeps the setup simple, though it means checking pressure by hand whenever the load changes.
Before buying, consider how often you carry loads and whether you want to set air pressure from a gauge or a height sensor. Compressors and gauges are sold separately, so plan for those if you want to inflate the bags at a trailhead or roadside. Keep the bag fittings and air lines inspected, since a leak is often the first sign of wear.
- Decide between manual and automatic inflation
- Plan for a compressor and gauges separately
- Check clearance around the axle after installation
- Look at tire and shock condition before adding load
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2249 |
| UPC | 767555100837 |
| System type | Axle mount |
| Bag/spring type | Double convoluted |
| Load capacity | 4,800 lbs per pair |
| Installation | Bolt on, no drilling required |
| Inflation method | Manual |
| Height sensor | Optional |
| Lift kit compatibility | Yes, may require spacers |
Vehicle fitment
Compatibility with a specific year, make, model or trim needs confirmation before ordering this kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mount is bolt-on and needs no drilling. Because the kit may require spacers on a lifted vehicle, check clearance at the axle and fender once the install is complete.
What’s included
The kit centers on the double convoluted air helper springs. Plan to verify the brackets, hardware and air lines against your installation before starting.
Not included: air compressor and gauges. The height sensor is optional.









