Overview
The Firestone Ride-Rite rear air helper spring kit 2355 is an axle mount air spring kit with double convoluted springs rated at 4,800 lbs per pair. It installs as a bolt-on kit with no drilling required.
It can provide up to 5000 lbs of leveling capacity and supports stability and ride quality with off-center loads. It is lift kit compatible, though spacers may be needed.
Key features
- Axle mount system
- Bolt-on installation with no drilling required
- Double convoluted air springs
- 4,800 lbs per pair
- Manual inflation
- Optional height sensor
- Lift kit compatible, may require spacers
Air spring maintenance and inflation
Axle mount air springs work between the axle and the body, so they see road grit, moisture and road salt. Good maintenance starts with keeping the bag surfaces and fittings clean and free of debris that could wear the material. Because the springs are inflated by hand, the pressure you set is only as steady as the gauge and valve you use, so check both before each adjustment.
Equal pressure in both bags keeps the vehicle level, so change them in small steps and recheck the ride height on each side. Helper springs work best when the shocks and bump stops are in good shape, since the air adds support but does not replace worn damping. Re-torque the axle mount bolts after the first few drives as a routine check.
- Wipe down bags and fittings after wet or salty trips
- Check valves for leaks with a soapy solution
- Recheck bolts after the first few drives
- Re-check level after any load change
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2355 |
| UPC | 767555110430 |
| Application | Rear |
| System type | Axle mount |
| Air spring type | Double convoluted |
| Load capacity | 4,800 lbs per pair |
| Installation | Bolt on, no drilling required |
| Inflation method | Manual |
| Height sensor | Optional |
| Lift kit compatibility | Yes, may require spacers |
Vehicle fitment
Verify your vehicle’s year, model and trim match before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a bolt-on installation with no drilling. Inflation is manual, and a compressor and gauges are optional extras that are not included with the kit. If a lift kit is installed, spacers may be needed.
What’s included
Compare the package contents with your installation before starting.
Not included: Compressor and gauges (optional extras).









