Overview
The Firestone Ride-Rite 2040 is a rear air helper spring kit for leaf spring trucks. It mounts between the frame and the rear suspension, using air bags to carry extra load and keep the rear end level when hauling or towing. It fits 1973–1986 Chevrolet K10, K20 and K30 trucks and 1987 Chevrolet V10, V20 and V30 trucks.
Adjusting air pressure lets the rear hold off-center loads without sagging, which helps cut suspension fatigue and reduces bottoming out over bumps. The brand rates the kit at up to 5,000 lbs. of leveling capacity per pair. The double convoluted bags are inflated by hand, so a separate compressor and gauges are needed to set pressure. Installation requires drilling, so this kit suits owners who are comfortable with that work or who have a shop perform it.
Key features
- Rear air helper bags mount to leaf spring suspension to keep the vehicle level under load.
- Rated for up to 5,000 lbs. of leveling capacity per pair.
- Double convoluted air bags with manual inflation.
- The height sensor is optional and is not included with the kit.
- Lift kit compatible; spacers may be required.
- Installation requires drilling.
Choosing a leaf spring helper setup
Leaf spring trucks often carry rear weight at the axle, so an air helper kit works best when the pressure is set to the load rather than left at one value. Before buying, compare the leaf spring condition, shackles and bushings, since worn parts can change how the helper bags sit. A helper kit does not replace worn leaf springs.
Drilling is part of the installation, so plan where mounting points will go before the truck is raised or the bags are fitted. Keep air lines clear of the shock mounts, brake lines and exhaust, and check the bag wall for chafing once installed. Regular checks for leaks and loose brackets help the system keep working as intended.
- Check leaf spring shackles and bushings
- Plan mounting points before drilling
- Check bag walls for chafing after install
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2040 |
| UPC | 767555014493 |
| System type | Leaf spring mount |
| Load capacity | 5,000 lbs. per pair |
| Bag/spring type | Double convoluted |
| Installation type | Requires drilling |
| Inflation method | Manual inflation |
| Application | Rear |
| Type of system | Air bag |
| Fitment type | Direct fit |
| Height sensor | Optional |
| Lift kit compatibility | Yes, may require spacers |
Vehicle fitment
The manufacturer fitment list covers these Chevrolet trucks: 1973–1986 K10, 1973–1986 K20, 1973–1974 and 1977–1986 K30, and 1987 V10, V20 and V30. Trim names in the list include Cheyenne, Custom, Custom Deluxe, Deluxe, Pickup Base, Scottsdale and Silverado.
Vehicles outside the years and models named here, including later Chevrolet trucks and 1975–1976 K30 models, are not in the list and are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This kit requires drilling, so mounting holes must be made as part of the fitting. Lift kit owners may need spacers to reach the intended ride height. Keep air lines clear of moving suspension parts and check every fitting for leaks after inflating.
What’s included
Check the package contents against your installation before starting.
Not included: The compressor and gauges, which are sold separately, and the height sensor, which is optional.









