Overview
The Firestone Ride-Rite 2410 is a rear axle-mount air helper spring kit for the 2005–2018 Toyota Tacoma. It fits between the frame and the rear suspension, using air bags to support extra weight and keep the truck level when hauling or towing. It fits Base, Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner trims.
The 2410 is a bolt-on design with no drilling required. Each pair is rated for 3,200 lbs. of load capacity. The double convoluted bags are inflated manually, and a compressor and gauges are sold separately. Lift kit compatibility is yes, though spacers may be needed.
Key features
- Axle-mount design for rear leveling on the 2005–2018 Toyota Tacoma.
- Bolt-on installation with no drilling required.
- Rated for 3,200 lbs. per pair.
- Double convoluted air bags with manual inflation.
- The height sensor is optional and is not included with the kit.
- Lift kit compatible; spacers may be required.
Tacoma leveling and daily use
Axle mount helper springs on a Tacoma are meant to support rear weight when the bed is loaded or a trailer is hitched. Many owners use them for occasional towing rather than constant load, so set the pressure for the typical job and leave it there. Watch for a rear end that sits low or bounces after a bump, since that can signal low pressure or a leak.
Because the kit is bolt-on, routine checks are mainly visual: look at the bags for chafing, check fittings with soapy water after inflating, and confirm the brackets remain tight. Keep the air lines routed away from moving suspension parts. Good habits like these help the helper springs hold level for longer.
- Set pressure for your usual load
- Check fittings for leaks with soapy water
- Confirm brackets remain tight after rough roads
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2410 |
| UPC | 767555113639 |
| System type | Axle mount |
| Load capacity | 3,200 lbs. per pair |
| Bag/spring type | Double convoluted |
| Installation type | Bolt on, no drilling required |
| Inflation method | Manual inflation |
| Application | Rear |
| Type of system | Air bag |
| Fitment type | Direct fit |
| Height sensor | Optional |
| Lift kit compatibility | Yes, may require spacers |
Vehicle fitment
The manufacturer fitment list covers 2005–2018 Toyota Tacoma trucks in the Base, Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner trims.
Other Toyota models such as the 4Runner or Tundra are not in the list, and Tacoma years outside 2005–2018 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt-on with no drilling required. Lift kit owners should check whether spacers are needed for the intended ride height. Keep air lines clear of moving suspension parts.
What’s included
Kit contents are not broken out for part 2410.
Not included: The compressor and gauges, which are sold separately, and the optional height sensor.









