Overview
The Firestone Ride-Rite rear air helper spring kit, model 2400, is an axle-mount air helper kit rated for 5,000 lbs of load leveling capacity per pair. Air helper springs like these support the rear of a vehicle under heavy or off-center loads, helping keep it level and reducing bottoming out.
The double convoluted air bags are adjusted by manual inflation, so a separate air source is needed to set pressure. The application notes limit the kit to 4×4 use, and it is marked compatible with lift kits, though spacers may be required.
Key features
- Axle-mount design for the rear of the vehicle
- 5,000 lbs of load leveling capacity per pair
- Double convoluted air bags
- Bolt on installation with no drilling required
- Manual inflation to adjust the bags and ride height
- Compatible with lift kits, may require spacers
- Optional height sensor available
Setting ride height with air
Axle-mount air helper bags carry part of the rear load, so they work best when the rest of the suspension is in good shape. Worn shocks, tired leaf springs and sagging bushings change how the bags share weight, which can leave one side low even after the air is set. This matters most when hauling or towing, since the load shifts how the bags share weight.
Set pressure in small steps with a separate compressor and gauge, measuring ride height on both sides after each change. Temperature shifts can move the reading, so recheck after the vehicle has sat for a while. A bag that loses pressure overnight usually has a fitting or valve leak, which is an easy check with soapy water.
- Check bag tops for rubbing against the axle
- Inspect fittings for seeping air
- Recheck height after the first trail runs
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Model number | 2400 |
| UPC | 767555112021 |
| System type | Axle mount |
| Load capacity | 5,000 lbs per pair |
| Bag type | Double convoluted |
| Installation type | Bolt on, no drilling required |
| Inflation method | Manual |
| Height sensor | Optional |
| Lift kit compatibility | Yes, may require spacers |
| Application | 4×4 only |
Vehicle fitment
Fitment depends on your rear axle and suspension setup, so confirm the year, model and trim of your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting is bolt on with no drilling, but lifted vehicles may need spacers to clear the bags. After mounting, check clearance between the bags and the axle, then adjust pressure in small steps while measuring ride height on both sides.
What’s included
Check the package contents against your installation before starting.
Not included: air compressor and gauges (sold separately) and the optional height sensor.









