Overview
The Firestone Ride-Rite Air Helper Spring Kit, part 2579, is a rear air helper spring kit that mounts between the frame and the suspension. It is designed for light trucks, vans and motorhomes that need better leveling when loaded for hauling or towing.
The kit uses heavy-duty convoluted air springs with load carrying capacities of 3,200 to 5,000 lbs per set. It includes brackets, air helper springs, hardware, an air line and inflation valves. Drilling is required, and the kit may vary depending on the application. No specific vehicles are named for this part number.
Key features
- Mounts between the frame and suspension
- Heavy-duty convoluted air springs
- Load capacity of 3,200 to 5,000 lbs per set
- Brackets, hardware, air line and inflation valves included
- Helps keep the vehicle level and improves handling while hauling and towing
- Helps level off-center loads and reduce suspension fatigue
Choosing an air helper setup
Air helper springs add support when a rear axle is carrying extra load, so they work best when the weight is steady, such as hauling a camper or towing a trailer. They do not replace the factory suspension. Consider how much load you carry most often, and whether the air springs will be used with a leveling system or a manual inflation setup.
Because drilling is needed, plan the job with the frame and suspension mounting points in view. Brackets should be placed where the frame is strong and clear of brake lines and fuel lines. Air lines should be routed away from heat, moving parts and sharp edges, and secured with clamps so they cannot rub through during travel.
- Typical load pattern for the vehicle
- Clearance around brackets and lines
- Inflation method and gauge access
- Air line routing and protection
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2579 |
| OEM number | W217602579 |
| UPC | 767555153390 |
| Application | Rear |
| Mounting location | Between frame and suspension |
| Load capacity | 3,200 to 5,000 lbs per set |
| Spring type | Heavy-duty convoluted air spring |
| Installation type | Requires drilling |
Vehicle fitment
Part 2579 is a broad-group kit for light trucks, vans and motorhomes. Match the kit to your exact vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required, so confirm the frame and suspension mounting points on your vehicle before the brackets are placed.
What’s included
Brackets, air helper springs, hardware, an air line and inflation valves are included. Plan a compressor and gauges separately.









