Overview
The Firestone Ride-Rite 2176 is a rear air helper spring kit for leaf spring mount suspensions. Air helper springs, also called load leveling kits, add support at the rear of a vehicle so it can carry heavier loads and sit more level.
The kit provides up to 5000 lbs of leveling capacity, with a load rating of 4,800 lbs per pair. It uses double convoluted air springs with manual inflation, and a compressor and gauges are needed and sold separately.
Key features
- Keeps the vehicle level under load
- Levels off-center loads
- Reduces suspension fatigue
- Allows air adjustments to improve the ride
- Helps reduce bottoming out
- Increases vehicle stability
Leaf spring mounts and load support
Helper springs on a leaf spring vehicle share the work with the leaf pack, so the leaves and their hangers should be inspected whenever the kit is installed. Drilling into the frame or bracket creates new stress points, so check the mounting area for cracks and rust before and after the work. Use the correct hardware and torque it evenly to keep the mount secure.
Shocks and bump stops matter more once helper springs are added, because the rear now carries load differently. Worn shocks may need replacing to keep the ride controlled. Adding air support also changes how the suspension rests at full droop, so review the bump stops after installation and listen for contact on rough roads.
- Inspect leaf pack and hangers
- Check frame and bracket for cracks
- Replace worn shocks as needed
- Review bump stops after installation
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Model | 2176 |
| UPC | 767555095232 |
| System type | Leaf spring mount |
| Load capacity | 4,800 lbs per pair |
| Leveling capacity | Up to 5000 lbs (per description) |
| Bag/spring type | Double convoluted |
| Installation type | Requires drilling |
| Inflation method | Manual inflation |
| Height sensor | Optional |
| Lift kit compatibility | Yes, may require spacers |
| Compressor and gauges | Sold separately |
Vehicle fitment
Make sure your year, model and trim are covered before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires drilling. The height sensor is optional. If the vehicle has a lift kit, spacers may be needed. Because drilling is required, work carefully and check clearances before tightening anything.
What’s included
Compare the package contents with your planned installation first.
Not included: Compressor and gauges, which are sold separately. The height sensor is optional.









