Overview
The Firestone Ride-Rite 2478 air helper spring kit is a leaf spring mount system with double convoluted air bags, rated 4,800 lbs per pair. Its job is to hold a vehicle level when the rear carries extra weight, which also helps with suspension fatigue. Firestone’s copy gives a leveling capacity of up to 5000 lbs for the heavy duty line.
Confirm fit for your vehicle’s year, model and trim before ordering, since no vehicle is named for this kit.
Key features
- Leaf spring mount for rear air leveling
- Double convoluted bags with a 4,800 lbs per pair rating
- Helps reduce suspension fatigue under heavy loads
- Improves ride through air adjustment
- Installation requires drilling
- Lift compatibility: yes, may require spacers
Leveling and suspension wear
Rear air leveling takes some strain off the leaf springs when the vehicle carries weight, which can slow the wear that comes from constant overloading. The benefit depends on the spring pack being in good shape to begin with.
Look over the leaf springs for sagging, broken leaves, cracked eyes and shifted center bolts. Check the shackles and bushings as well, since a loose link can change how the air bags load the rear axle.
Once the kit is in place, watch for uneven tire wear, a rear end that sits high, or a ride that feels bouncy. Any of these signs can point to a worn component that should be fixed before the helper does its job well.
- Look for sagging or broken leaves
- Check shackles and bushings for play
- Watch for uneven tire wear
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2478 |
| UPC | 767555118788 |
| System type | Leaf spring mount |
| Bag/spring type | Double convoluted |
| Load capacity | 4,800 lbs per pair |
| Installation | Requires drilling |
| Inflation method | Manual |
| Height sensor | Optional |
| Lift kit compatibility | Yes, may require spacers |
Vehicle fitment
No vehicle is named for this kit. Confirm fit for your year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is part of the installation, so plan for it before starting. Spacers may be needed on a lifted vehicle, so check clearance once the kit is in place.
What’s included
Brackets, hardware and lines should be checked against the package before installation. Compressor and gauges are not included.
Not included: air compressor and gauges. The height sensor is optional.









