Overview
The Firestone Ride-Rite Coil-Rite Air Helper Spring Kit 4164 is a rear air helper spring kit for coil spring vehicles. The bags fit inside the existing coil springs to create a variable spring rate, which helps level the vehicle and supports handling when the vehicle carries heavy loads. The kit is rated for 500 lbs per pair.
It fits the 2008-2011 and 2013-2018 Toyota Land Cruiser (Base), the 2008-2016 Toyota Sequoia in the Limited, Platinum and SR5 trims, the 2009-2011 Lexus LX570 (Base), and the 2016 INFINITI QX80 in the Base and Limited trims. The bags work between -40F (-40C) and 180F (82C).
Key features
- Coil type air bags that sit inside the existing coil springs
- Variable spring rate for leveling under load
- Load capacity of 500 lbs per pair
- No drilling required
- Manual inflation with optional compressor and gauges
- Universal application field with a rear position
Before You Install Air Helpers
Air helper springs work alongside the coil springs they sit inside, so their effect depends on how the rear suspension is loaded. Before installation, look over the coil springs, shock mounts and bump stops for wear, since worn parts change how the helpers share the load. Plan the air source before you start, because manual inflation means the ride height is set by hand with a gauge.
Once installed, check the bags at regular service intervals for cracks, chafing against the spring, and leaks at the fittings. Re-check the mounting hardware after the first few trips under load, and keep the bags at the pressure you set rather than letting them sit low.
- Inspect the bags for chafing where they touch the coil spring
- Check fittings and lines for slow leaks with a gauge
- Re-torque mounting hardware after the first trips under load
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 4164 |
| UPC | 767555112724 |
| Position | Rear |
| Front or rear application | Universal |
| System type | In coil |
| Bag or spring type | Coil type bag |
| Load capacity | 500 lbs per pair |
| Inflation method | Manual inflation |
| Installation type | No drilling required |
| Operating temperature | -40F (-40C) to 180F (82C) |
| Height sensor | Not compatible |
| Lift kit compatible | No |
Vehicle fitment
It fits 2008-2011 and 2013-2018 Toyota Land Cruiser, 2008-2016 Toyota Sequoia in the Limited, Platinum and SR5 trims, 2009-2011 Lexus LX570 (Base), and 2016 INFINITI QX80 in the Base and Limited trims.
The list does not include the 2012 Toyota Land Cruiser, Sequoia models from 2017 onward, or other INFINITI QX80 model years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bags install inside the rear coil springs, so the installer must follow the spring arrangement of the specific vehicle. Manual inflation requires a separate air source and gauge to set ride height.
What’s included
Rear coil type air helper springs and their mounting components.
Not included: Compressor and gauges, which are optional and sold separately.









