Overview
The FlatLink 00050-05 is a winch safety thimble and D-ring that takes the place of a standard winch hook. It is a folding shackle mount for recovery winches. It is a universal fit product, so compatibility depends on the fairlead, the mounting bracket and the rope or cable diameter.
Standard hooks can cut and fray recovery straps, and strap ends can escape during the slack that comes with a typical winching recovery. A screw pin shackle avoids that because its pin keeps strap loops from slipping free. The FlatLink is a hook replacement that does not need the rope spliced.
Key features
- Folding shackle mount designed for recovery winches
- Replaces the conventional winch hook with a shackle thimble and D-ring
- Less than 1.75 inches thick; fits roller fairlead license plate mounting brackets
- No splicing; intended for steel cable or synthetic rope up to 3/8 inch diameter
- Cable eye held in place by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring
- EPDM rubber guards protect alloy fairleads, secured with 4 barbed tips
- Stows neatly against roller or Hawse type fairleads
- Billet 6000 series aluminum, anodized and powder coated in 5 colors; made in the USA
Rigging a folding shackle
Shackle choice matters as much as the thimble itself. Common 3/4 inch shackles are the size this FlatLink is built around, so match the shackle to that size and use a screw pin type that closes fully. A shackle that is too small concentrates force on the pin, while one that is oversized can rotate and misalign under load. Check the shackle body for bends and the threads for damage before each use.
Rigging is more forgiving when the load path is straight. Keep the rope running in line with the fairlead and avoid side pulls that twist the thimble. Mud, ice and snow can hide wear on the pin and snap ring, so clean the area and inspect it before a difficult pull. Reduce loads on the rigging by using a snatch block or a shorter line when the terrain allows it.
Specifications
| Brand | Factor 55 |
|---|---|
| Part number | 00050-05 |
| UPC | 700006932250 |
| Material | 6000 series billet aluminum |
| Finish | Anodized and powder coated in 5 different colors |
| Thickness | Less than 1.75 inches |
| Rope or cable size | Up to 3/8 inch diameter, steel cable or synthetic rope |
| Pin | 5/8 inch diameter grade 5 steel double shear pin, internal snap ring |
| Guards | EPDM rubber, 4 barbed tips |
| Shackle size | Common 3/4 inch shackles |
| Origin | Made in the USA |
Vehicle fitment
No vehicle-specific fitment is listed; Factor 55 gives universal fit. Check how the FlatLink sits with your fairlead and mounting bracket rather than matching a model year.
The FlatLink is designed for roller and Hawse type fairleads, so the fairlead style you already run is the main check. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation takes minutes, and the FlatLink needs no splicing. Verify the snap ring and double shear pin are engaged before loading the line, and size the shackle and rigging to the load.
What’s included
It comes as the shackle thimble and D-ring with EPDM guards, a double shear pin and an internal snap ring.
Not included: 3/4 inch shackle, cable or rope, fairlead and mounting bracket.


























