Overview
The Factor 55 ProLink Bridle, part number 00220-06, is a multiple shackle mount for winch cables. It gives winch owners a screw pin shackle or D-ring attachment in place of the conventional winch hook, with three individual shackle mounting holes for bridle towing.
The Bridle is a specialized commercial product built for the towing industry. Like all ProLink models, it is engineered and made in the USA from 6000 series billet aluminum with a 6Al-4V titanium double shear pin. Its only finish is Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray.
Bridle towing spreads a load across more than one attachment point. Factor 55 compares the Bridle’s operation to fish plate towing used in the ship towing industry, where yaw of the towed boat is undesirable.
Key features
- Three individual shackle mounting holes for fixed length bridle links on the outside holes
- Single centered shackle mounting point for a conventional single shackle recovery point
- Dedicated shackle mounting points, which Factor 55 says prevent dangerous shackle side loading
- Built for Closed System Winching techniques
- Designed for self centering shackles in commercial high repeat bridle towing
Bridle towing basics
Bridle towing splits the pull between two points, which reduces strain on a single attachment and helps keep a towed load tracking straight. Each leg of a bridle carries part of the load, so the angle between legs matters. Wider angles place more force on each leg, while narrow angles keep the pull closer to the centerline. Keep both legs the same length so the load shares evenly, and avoid mixing bridle links of different rated strength.
Commercial towing puts heavy, repeated loads on hardware, so inspect the mount, pin and every shackle before each job. Look for elongation or bending in the body, wear around the shackle holes, and any sign that the titanium pin is not seating fully. Clean grit out of the holes and keep the pin lubricated so it can be removed without damage. Replace parts that show cracks or deformation rather than returning them to service.
Specifications
| Brand | Factor 55 |
|---|---|
| Part number | 00220-06 |
| UPC | 700007514031 |
| Shackle mounting holes | Three individual outside holes |
| Center point | Single centered shackle mounting point |
| Shear pin | 6Al-4V titanium double shear pin |
| Body material | 6000 series billet aluminum |
| Finish | Mil-A-8625 F Type III hard anodized gray, the only finish offered |
| Made in | USA |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit product. Its use is towing and recovery on the winch cable, not fitting a particular vehicle, so match it to the bridle links and shackles you plan to use.
Installation notes
For bridle towing, fixed length bridle links attach to the three outside holes. For a single recovery point, use the centered mounting point. The dedicated points provide the side loading protection, so keep each shackle in its designated hole rather than an adjacent one. Choose bridle links and shackles with load ratings suited to the load you expect.
What’s included
One ProLink Bridle shackle mount, part number 00220-06.
Not included: Fixed length bridle links and screw pin shackles, which attach to the mount.


















