Overview
The Factor 55 ProLink Loaded, part number 00015-05, is a shackle mount that puts a standard 3/4 inch screw pin shackle on an existing winch cable or synthetic rope eye. It is meant to replace the conventional winch hook as the attachment point at the end of the line.
Factor 55 engineered and machined the mount in the USA from lightweight billet 6061 aluminum. A removable, oversized 5/8 inch double shear pin holds the eye inside the body, and the pin carries the load across two shear planes.
A closed screw pin shackle differs from an open hook because its pin is secured in place. The shackle is a separate component that attaches to the front hole. Synthetic ropes and steel cables are both common winch lines, and the mount accepts either.
Key features
- Attaches a standard 3/4 inch screw pin shackle to existing eyes
- Oversized 5/8 inch double shear pin is removable
- Precision shackle mounting hole at the front
- Massive 1.2 inch thick mounting tab
- Compatible with both Hawse and Roller fairleads
- Billet 6061 aluminum body, made in the USA
Pins, shackles and rigging
Every link in a recovery line carries the full load, so the pin, shackle and mount should be matched as a set. A removable pin that holds the eye is only as strong as its seating, and a pin that backs out under load can release the line. Use a shackle with a screw pin that is threaded fully and tightened by hand before the line is loaded. Keep a spare clip on hand if your trail use involves frequent swaps.
Inspect the mounting tab and front hole before each trip. A tab that shows cracks, a hole worn oval, or a pin with rounded edges should be retired. Clean the threads of the shackle, and check that the pin slides freely before tightening. Keeping the shackle and mount in good condition makes the difference between a controlled pull and a sudden failure.
Specifications
| Brand | Factor 55 |
|---|---|
| Part number | 00015-05 |
| UPC | 700006384004 |
| Body material | Lightweight billet 6061 aluminum |
| Shackle size | Standard 3/4 inch screw pin |
| Pin | Removable, oversized 5/8 inch double shear |
| Mounting tab thickness | 1.2 inch |
| Fairlead compatibility | Hawse and Roller |
| Made in | USA |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit mount. It is a winch accessory for cable and rope eyes rather than a part sized to one vehicle, so match it to the winch line, the fairlead and the 3/4 inch shackle.
The mount works with both Hawse and Roller fairleads, so fairlead type is worth checking before fitting it.
Installation notes
Fit the cable or rope eye into the body, secure it with the 5/8 inch pin, and attach the 3/4 inch screw pin shackle through the front mounting hole. Removing the pin releases the eye. Check that the pin is fully seated before the line takes load, and use a shackle rated for the recovery you plan.
What’s included
One ProLink Loaded shackle mount, part number 00015-05.
Not included: The 3/4 inch screw pin shackle.
































