Overview
The Factor 55 ProLink XXL, part number 00210-01, is a winch shackle mount that replaces the conventional winch hook with a screw pin shackle or D-ring. It is the larger-capacity model in the ProLink line, originally designed for military winch applications rated at 24,000 pounds and now available to the general public.
The XXL was originally designed for military winch applications rated at 24,000 pounds, and Factor 55 now makes it available to the general public. Like the other ProLink models, it is engineered and made in the USA from 6000 series billet aluminum and equipped with a 6Al-4V titanium double shear pin. The base is protected by a barbed, high durometer EPDM rubber guard.
A double shear pin is supported at two points along its length, so the load is shared across two shear planes. The XXL’s shear pin diameter is .750 inches, which is one of the key dimensions for this mount.
Key features
- Working load limit of 24,000 pounds
- Ultimate failure of over 63,000 pounds
- Titanium double shear pin, .750 inches in diameter
- Barbed, high durometer EPDM rubber guard on the base
- Compatible with steel cables and synthetic ropes up to 1/2 inch in diameter
- Accepts common 3/4 inch shackles and larger 7/8 inch shackles
Working load and margins
A working load limit is the load a rigging component should carry in normal use, and the ultimate failure figure is the point where it breaks. Keeping pulls well under the working limit leaves room for shock loads, which build quickly when a stuck vehicle suddenly releases. Rigging in a recovery is only as strong as its weakest component, so the shackle, strap and anchor each need a rating that meets the expected load.
Shear pins are designed to carry load across their diameter, so a pin that shows bending, flattening or a worn bearing surface should be replaced before the next use. Keep the eye seated and the pin fully engaged at every recovery.
- Use shackles rated at or above the expected load
- Avoid jerking the line during a pull
- Replace a bent or worn shear pin
Specifications
| Brand | Factor 55 |
|---|---|
| Part number | 00210-01 |
| UPC | 700006932191 |
| Working load limit | 24,000 pounds |
| Ultimate failure | Over 63,000 pounds |
| Shear pin | 6Al-4V titanium double shear pin, .750 inches diameter |
| Body material | 6000 series billet aluminum |
| Base guard | Barbed, high durometer EPDM rubber |
| Cable or rope capacity | Steel cable or synthetic rope up to 1/2 inch diameter |
| Shackle sizes | 3/4 inch and 7/8 inch |
| Made in | USA |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit winch shackle mount, matched by cable diameter, shackle size and working load rather than by vehicle. Compare the 24,000 pound working load limit and the 1/2 inch cable or rope limit against your winch before use.
Installation notes
The XXL mounts on the winch line in place of the hook. Keep the cable or rope within the 1/2 inch limit and use 3/4 inch or 7/8 inch shackles. Make sure the shear pin is fully engaged so the eye stays captured. Use a shackle whose rating meets or exceeds the load you expect to recover with.
What’s included
One ProLink XXL shackle mount, part number 00210-01.
Not included: Screw pin shackles in the 3/4 inch or 7/8 inch size the XXL accepts.


























