Overview
The Fabtech FTS350UBK is a U-bolt kit, part number FTS350UBK, sold as a set. The kit is sold as universal, but U-bolts must match the axle and springs they clamp, so fit depends on the vehicle.
The kit has four U-bolts, eight Nylock tall nuts and eight thick flat washers. Confirm the axle and spring match before installing.
Key features
- Four U-bolts
- Eight Nylock tall nuts
- Eight thick flat washers
- Sold as a kit
Matching the axle and springs
A U-bolt clamps the axle to the spring pack, so the clamp only works when the bolt diameter, axle tube and spring seat all line up. Before fitting the kit, measure the axle, look at the spring pad for wear, and confirm the bolt legs will reach through the pad and the plate without bottoming out on the threads.
Nylock tall nuts resist loosening, but the clamp still relies on steady contact between the U-bolts, the plate and the spring. Check the nuts after the first few drives and at regular service. Replace any U-bolt that shows thread damage, stretch or corrosion, since a weak clamp can let the spring shift on the axle.
- Confirm the axle tube diameter before ordering
- Check spring pads for flattening or cracks
- Retighten nuts after the first few drives
- Keep threads clean and free of rust before installing
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS350UBK |
| UPC | 674866008960 |
| Sold as | Kit |
| U-bolts | Four |
| Nuts | Eight Nylock tall nuts |
| Washers | Eight thick flat washers |
Vehicle fitment
Fit depends on the axle and spring setup rather than a make, model or year. Measure your axle and spring setup before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four U-bolts, eight Nylock tall nuts and eight thick flat washers. Lift blocks are not included in this kit.








