Overview
The Fabtech FTS93012 is a dropped pitman arm for the 2009 Dodge Ram 2500 and Ram 3500 with power steering.
Dropped pitman arms are often needed in kits like this to correct steering geometry after a suspension system is installed. The forged and CNC machined construction is designed to be stronger than the stock arm.
The drop amount for this part is shown two ways by the manufacturer: the specification line lists 6 inches, while the short summary shows only the number 3. Confirm the figure with Fabtech before choosing this arm for a particular lift.
A pitman arm with more drop moves the drag link connection lower, and the drop should match the lift on the truck. Confirm the drop amount against your lift height before ordering. The arm is front mounted for power steering Rams, and the 2500 trims include the Power Wagon.
Key features
- Specification line lists 6 inches of drop
- Front position
- For power steering
- Direct fit
- Covers the 2009 Ram 2500 and 3500
- Forged and CNC machined
- It is designed to be stronger than the stock arm, thanks to forging and CNC machining.
Choosing the right drop
A dropped pitman arm connects the steering gear to the drag link at a lower point than a stock arm. That lower position helps keep the drag link angle and the steering linkage geometry close to correct when a lift raises the front suspension. The right amount of drop depends on the lift height, so measure the lift and compare it against the arm’s drop before buying. Shops usually check the drag link angle and tie rod ends at the same time, since both are affected by the same change.
Because steering loads pass straight through this arm, inspect it at each tire rotation. Look for play at the ball stud, cracks near the forged section, and a steering wheel that wanders or returns slowly. Replace the arm if the taper or threads are damaged, and recheck toe after any linkage work. Power steering trucks show these changes quickly, so a short low speed test drive is a good way to confirm the steering feels right.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS93012 |
| UPC | 674866028982 |
| Product type | Pitman arm |
| Amount of drop | 6 inches (the short summary shows 3) |
| Position | Front |
| Fit type | Direct fit |
| Steering type | Power steering |
Vehicle fitment
The fitment covers the 2009 model year of the heavy-duty Ram. The 2500 trims are Laramie, Power Wagon, SLT, ST and SXT, and the 3500 trims are Laramie, SLT, ST and SXT.
- 2009 Dodge Ram 2500 (Laramie, Power Wagon, SLT, ST, SXT)
- 2009 Dodge Ram 3500 (Laramie, SLT, ST, SXT)
Only 2009 is named. Other Ram years and the Ram 1500 are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the correct torque values for your fasteners, and have a qualified technician check the steering after fitting.
What’s included
One Fabtech pitman arm. No nut or washer is described.









